|
Product Documentation is available for download in PDF format, which requires Adobe Acrobat Reader to view.
|
ACF - Activated Carbon Filter
The ACF Series Activated Carbon Filter removes dissolved organics from liquid streams by adsorption. Typical uses include removal of chlorine, dissolved organics, hydrocarbons and chlorinated hydrocarbons in water treatment systems, as well as removal of acids in amine treatment systems.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1
- 150 psig standard design pressure; custom design pressures up to 3000 psig
- -20°F/+100°F (-29°C/+38°C) standard design temperature
- 150lb ANSI RF flanged inlet/outlet nozzles (additional nozzles available as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; other connection types available
- welded carbon steel with double epoxy lining or stainless steel standard housings; custom housing materials available
- stainless steel interior mesh screen for carbon load; quick access for spent carbon removal
- standard elliptical head with manway access
- backwashable
- external primer finish for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; paint or coating to customer specifications available; epoxy, rubber or Teflon linings available
- available options include valves, safety relief valves, differential pressure gauges and site glass
VC - Clay Treater
The VC Series Clay Treater provides removal of surfactants from liquid hydrocarbon fuels, as well as removal of acids or oxidation products from lubrication or hydraulic oils. It is commonly installed upstream of filter separators to remove surfactants that can disarm filter separators. The VC uses clay canister filtration media to absorb surfactants, often as a pre-filter.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1
- 150 psig standard design pressure; custom design pressures up to 3000 psig
- -20°F/+150°F (-29°C/+66°C) standard design temperature
- 150lb ANSI RF flanged inlet/outlet nozzles (additional nozzles as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; custom flange ratings available
- carbon steel standard housing; custom housing materials available
- standard hydraulic jack headlift; optional handwheel headlift available
- standard swing bolt closure; optional thru-bolt closure available; O-ring closure seal available in Buna or Viton
- quick canister replacement access
- external primer finish and internal epoxy coating for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; paint or coating to customer specifications available
- available options include air eliminators, valves, safety relief valves, pressure gauges, liquid level gauges, sampling kits and working platform
L - Dehydrator
The L Series Dehydrator provides gross water removal from liquid hydrocarbon fuels such as aviation fuel, kerosene, gasoline, diesel and liquid propane to an efficiency of 99%. It employs a variety of replaceable coalescent filter packs to trap particle contamination and coalesce water from the fuel. Free water is collected in a drainage sump.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1
- 150 psig standard design pressure; custom design pressures up to 3000 psig
- -20°F/+150°F (-29°C/+66°C) standard design temperature
- 150lb ANSI RF flanged inlet/outlet nozzles (additional nozzles available as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; custom flange ratings available
- horizontal vessel design with saddle support
- carbon steel standard housing; custom housing materials available
- standard swing bolt or hinged closure; optional thru-bolt closure available; O-ring closure seal available in Buna or Viton
- quick filter pack replacement access; standard Excelsior repack media; various application-specific repack media available
- water collection sump; optional sump heater available
- external primer finish and internal epoxy coating for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; paint or coating to customer specifications available
- available options include air eliminators, valves, safety relief valves, automatic water dump valves, pressure gauges, liquid level gauges and working platform
FGCS - Fuel Gas Conditioning System
Fuel Gas Conditioning Systems remove small amounts of moisture, liquid mist, and particulate contaminants from fuel gases. Capabilities include gas preheating and pressure reduction as required by specification. Gas metering is also available.
The FGCS prepares the fuel (natural) gas for use in gas turbines, gas furnaces, gas burners, etc. It is typically used by gas turbine manufacturers, combined cycle power plants, natural gas turbine installations, gas fired furnaces, and small off-shore and on-shore power generators. A variety of Fuel Gas Conditioning System configurations are available to match the specific needs of different applications.
Features & Benefits At A Glance
- designed to deliver gas pressure, temperature and degree of purity to meet custom specifications
- scrubs liquids from the gas stream
- heats gas indirectly to required degree of superheat above dew point
- accommodates flow measurement/custody transfer via D.P. Orifice flow meter
- full PLC Control Logic
- approved for use in Class 1, Div 1, Group D hazardous locations
FM - Fuel Monitor
The FM Series Fuel Monitor provides clean, dry fuel as the final point of filtration in aviation fueling systems. An increase in differential pressure across the unit or a corresponding decrease in flow rate indicates water and/or dirt is present in the influent fuel.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1 and API Bulletin 1581
- 150 psig standard design pressure; custom design pressures up to 3000 psig
- -20°F/+160°F (-29°C/+71°C) standard design temperature
- 150lb ANSI RF flanged inlet/outlet nozzles (additional nozzles available as needed); 600lb NPT couplings for vent, drain, pressure gauge and air eliminator connections; custom flange ratings available
- optional victaulic connections for quick uncoupling
- standard aluminum housing; custom housing materials such as carbon or stainless steel available
- standard horizontal housing with saddle supports; vertical housing available; quick cartridge replacement access
- standard swing bolt closure; optional thru-bolt closure available; O-ring closure seal available in Buna or Viton
- internal epoxy coating for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; paint or coating to customer specifications available
- available options include air eliminators, valves, safety relief valves, pressure gauges, liquid level gauges and sampling kits
GFS - Gas Filter Separator
The GFS Series Gas Filter Separator removes moisture, liquid mists, aerosol and contaminants from hydrocarbon gases, including natural gas, propane, butane and methane, using a three-stage design. The first stage removes gross water by impingement on cartridge stools. The second stage coalesces water using cartridges, with particulate removal down to 0.5 micron. During the third stage, a stainless steel vane mist eliminator removes any remaining moisture. Water collects in the sump to be purged from the system, and clean, dry gas passes through the outlet.
The GFS is ideal for use in a wide range of applications, including chemical/petrochemical/natural gas plants, pipelines, refineries, compressor and metering/regulation stations, and power generation plants.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1
- single, duplex or multiplex arrangement; skid packaged configuration with controls and heating equipment available
- design pressures available up to 3000 psig
- -20°F/+150°F (-29°C/+66°C) standard design temperature
- 6000lb NPT couplings for vent, drain and pressure gauge connections (additional nozzles available as needed)
- carbon steel standard housings; custom housing materials available
- horizontal configuration with sump (sump heater available); optional vertical configuration; 3L Pogo (spring-assisted) or hydraulic jack headlift on vertical models
- multi-staged for better efficiency with low pressure drop; quick access cartridge replacement
- standard swing bolt closure; optional thru-bolt closure available; O-ring closure seal available in Buna or Viton
- external primer finish and internal epoxy coating for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; paint or coating to customer specifications available
- optional manual, pneumatic or electric drainage control packages available
- available options include three way valves, safety relief valves, pressure gauges, liquid level gauges and working platform
HV - Liquid Filter Separator (Two Stage Horizontal)
The HV Series Liquid Filter Separator provides water coalescing and filtration of hydrocarbon fuels such as jet fuel, kerosene, diesel, gasoline and similar liquids. The HV's horizontal layout and two-stage design effectively removes particulate from fuel and provides quick and convenient access for cartridge replacement. Units can be engineered for either fixed or mobile applications.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1 and API Bulletin 1581
- single, duplex or multiplex arrangement
- 150 psig standard design pressure; custom design pressures up to 3000 psig
- -20°F/+150°F (-29°C/+66°C) standard design temperature
- 150lb ANSI RF flanged inlet/outlet (additional nozzles available as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; custom flange ratings available
- carbon steel standard housings; custom housing materials available
- leg supports for housings under 12" (305mm) diameter; saddle supports for housings 12" (305mm) diameter and over
- standard swing bolt closure; optional thru-bolt closure available; O-ring closure seal available in Buna or Viton
- external primer finish and internal epoxy coating for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; paint or coating to customer specifications available
- available options include sump heaters, air eliminators, valves, safety relief valves, automatic water dump valves, water slug shut-off devices, pressure gauges, liquid level gauges and working platform
VV - Liquid Filter Separator (Two Stage Vertical)
The VV Series Liquid Filter Separator provides water coalescing and filtration of hydrocarbon fuels, such as jet fuel, kerosene, diesel, gasoline and similar liquids. The VV's vertical two stage design combines coalescer and separator cartridges based on flow and product, as well as providing quick and convenient cartridge replacement access.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1 and API Bulletin 1581
- 150 psig standard design pressure; custom design pressures up to 3000 psig
- -20°F/+150°F (-29°C/+66°C) standard design temperature
- 150lb ANSI RF flanged inlet/outlet nozzles (additional nozzles available as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; custom flange ratings available
- carbon steel standard housing; custom housing materials available
- 3L Pogo (spring-assisted) headlift on housing dimensions up to 24" (610mm); hydraulic jack headlift on housing dimensions over 24" (610mm)
- standard swing bolt closure; optional thru-bolt closure available; O-ring closure seal available in Buna or Viton
- external primer finish and internal epoxy coating for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; paint or coating to customer specifications available
- available options include sump heaters, air eliminators, valves, safety relief valves, automatic water dump valves, water slug shut-off devices, pressure gauges, liquid level gauges and working platform
WAL - Liquid Filter Separator (Three Stage Horizontal)
The WAL Series Liquid Filter Separator provides water coalescing and filtration of hydrocarbon fuels, such as jet fuel, kerosene, diesel, gasoline and similar liquids, where greater efficiency of water removal is required. The WAL is a three-stage horizontal liquid filter separator.
The first stage removes particulate and coalesces the water contaminant, while the second stage separates water droplets from the fuel. The third stage is an extra safeguard to absorb any remaining water.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1 and API Bulletin 1581
- 150 psig standard design pressure; custom design pressures up to 3000 psig
- -20°F/+150°F (-29°C/+66°C) standard design temperature
- 150lb ANSI RF flanged inlet/outlet nozzles (additional nozzles available as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; custom flange ratings available
- carbon steel standard housing; custom housing materials available
- leg supports for housings under 12" (305mm) diameter; saddle supports for housings 12" (305mm) diameter and over
- standard swing bolt closure; optional thru-bolt closure available; O-ring closure seal available in Buna or Viton
- quick cartridge replacement access
- external primer finish and internal epoxy coating for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; paint or coating to customer specifications available
- available options include sump heaters, air eliminators, valves, safety relief valves, automatic water dump valves, pressure gauges, liquid level gauges and working platform
NGS - NGS1000 Natural Gas Scrubbing System
The NGS1000 Natural Gas Scrubbing System is engineered specifically for industrial applications with gas supply lines to equipment such as gas catalytic heaters and other gas-fuelled appliances. It is designed to remove contaminants found in fuel gas from natural gas wells, thereby reducing or eliminating instrument and heater failure caused by the presence of such contaminants. The NGS1000 is available in two sizes and also features a desiccant-based scrubber cartridge designed for easier installation and maintenance.
Features & Benefits At A Glance
- flow rates to 10 SCFM or 25 SCFM
- 250 psig standard design pressure
- particulate removal down to 0.5 micron in size
- maximum operating temperature of 93°C (200°F); minimum operating temperature of -40°C (-40°F)
- housing and cover materials are constructed from extruded, heat treated, machined and anodized 6000 Series aluminum; standard stainless steel Universal Mounting Kit
- standard 1/4" or 3/4" NPT inlet/outlet ports
- drain cock included
- a variety of filtration media available, including Activated Carbon, Activated Aluminum and Molecular Sieve; filter media change-out indicator plugs available
- interchangeable with existing applications
- designed to ASME Section VIII Div. 1; Canadian Registration Number# OH6573.213 is standard for all units
FC - Single Bag Filter Housing
The FC Series Single Bag Filter Housing provides effective, economical filtration of liquids such as paints, inks, coolants, water, solvents, glues, recycled oils and beverages. Disposable filter bags are available in a wide range of materials and micron ratings to remove particulate matter down to 1 micron.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1
- single, duplex or multiplex arrangement
- 150 psig standard design pressure; custom design pressures up to 3000 psig
- -20°F/+150°F (-29°C/+66°C) standard design temperature
- 3000lb couplings or 150lb ANSI RF flanged inlet/outlet nozzles (additional nozzles available as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; custom flange ratings available
- stainless steel or carbon steel housings; custom housing materials available
- perforated stainless steel (SS304 or SS316) bag support construction
- hinged lid; quick bag replacement access
- standard swing bolt closure; optional thru-bolt closure available; O-ring closure seal available in Buna, Viton, Teflon, Silicone or EPDM
- external primer finish and internal epoxy coating for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; paint or coating to customer specifications available
- available options include valves, safety relief valves, pressure gauges and working platform
BF - Multi Bag Filter Housing
The BF Series Multi Bag Filter Housing provides economical bulk filtration for liquids such as paints, inks, coolants, water, solvents, glues, recycled oils and beverages. The BF is sized from 3 to 24 bags and accommodates replaceable filter bags to remove particulates down to 1 micron.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1
- single, duplex or multiplex arrangement
- 150 psig standard design pressure; custom design pressures up to 3000 psig
- -20°F/+150°F (-29°C/+66°C) standard design temperature
- 150lb ANSI RF flanged inlet/outlet nozzles (additional nozzles available as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; custom flange ratings available
- carbon steel standard housing; custom housing materials available
- perforated stainless steel (SS304 or SS316) bag support construction
- 3L Pogo (spring-assisted) headlift on housing diameters 12" to 24" (305mm to 610mm); hydraulic jack headlift on housing diameters over 24" (610mm); housing dimensions under 12" (305mm) utilize handles, not headlifts; optional handwheel or 3L Cantilever headlifts available
- quick access bag replacement
- standard swing bolt closure; optional thru-bolt closure or patented Easy Access Closure available; O-ring closure seal available in Buna, Viton, Teflon, Silicone or EPDM
- external primer finish and internal epoxy coating for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; paint or coating to customer specifications available
- available options include valves, safety relief valves, pressure gauges, sampling probes and working platform
VF - Aviation and Petroleum Cartridge Filter Housing
The VF Series Cartridge Filter Housing for aviation and petroleum applications uses specific pleated or depth media cartridges to remove particles as small as 0.5 micron from hydrocarbon liquids such as jet fuels, diesel, gasoline, solvents, coolants, lubricating oils, hydraulic oils and processing fluids.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1
- single, duplex or multiplex arrangement
- 150 psig standard design pressure; custom design pressures up to 3000 psig
- -20°F/+150°F (-29°C/+66°C) standard design temperature; higher design temperatures available
- 150lb ANSI RF flanged inlet/outlet nozzles (additional nozzles available as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; custom flange ratings available
- carbon steel standard housings; custom housing materials available
- aluminum cartridge hardware; standard cartridge lengths of 14" (356mm), 29" (737mm), 44" (1118mm) and 56" (1422mm); quick access cartridge replacement; custom cartridge configurations, sizes and filter media available
- 3L Pogo (spring-assisted) headlift on housing diameters 12" to 24" (305mm to 610mm); hydraulic jack headlift on housing diameters over 24" (610mm); housing dimensions under 12" (305mm) utilize handles, not headlifts; optional handwheel or 3L Cantilever headlifts available
- standard swing bolt closure; optional thru-bolt closure or patented Easy Access Closure available; O-ring closure seal available in Buna, Viton or Teflon
- external primer finish and epoxy coated interior for carbon steel housings
- available options include valves, safety relief valves, pressure gauges and working platform
FW - General Industrial Cartridge Filter Housing
The FW Series Cartridge Filter Housing for general industrial applications removes particulates from liquid streams, often as a pre-filter ahead of finer particle separation equipment. The standard design is based upon the single or double open-ended cartridge, but can be adapted to many filter cartridge designs, configurations and sizes.
The FW is ideal in applications across a wide range of processing industries, including food and beverage, pharmaceutical, semi-conductor, chemical plants, water treatment and remediation.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1
- single, duplex or multiplex arrangement
- 150 psig standard design pressure; custom design pressures up to 3000 psig
- -20°F/+150°F (-29°C/+66°C) standard design temperature; higher design temperatures available
- 150lb ANSI RF flanged inlet/outlet nozzles (additional nozzles available as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; custom flange ratings available
- stainless steel standard housings; custom housing materials available
- stainless steel cartridge hardware; standard cartridge lengths of 10" (254mm), 20" (508mm), 30" (762mm) and 40" (1016mm) at 10 microns nominal; designed to fit single or double open-ended cartridges; quick access cartridge replacement; custom cartridge configurations, sizes and filter media available
- 3L Pogo (spring-assisted) headlift on housing diameters 12" to 24" (305mm to 610mm); hydraulic jack headlift on housing diameters over 24" (610mm); housing dimensions under 12" (305mm) utilize handles, not headlifts; optional handwheel or 3L Cantilever headlifts available
- standard swing bolt closure; optional thru-bolt closure or patented Easy Access Closure available; O-ring closure seal available in Buna, Viton, Teflon, Silicone or EPDM
- external primer finish and internal epoxy coating for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; rubber, PVC, PVDF and other internal linings available; paint or coating to customer specifications available
- available options include valves, safety relief valves, pressure gauges, steam jackets and working platform
F & FD - Lube Oil, Seal Oil & Control Oil Cartridge Filter Housing
The F & FD Series Cartridge Filter Housings provide continuous particulate filtration for both critical and non-critical lube, seal and control oil applications. Many standard F & FD systems conform to API 614 requirements for system components, including the filters and transfer valves, as well as the required controls and instrumentation.
F & FD Series Housings are ideal across a wide range of applications, including: turbine, machine tool and lube oil console manufacturing; mining gear lube oil, transformer oil and heat transfer oil filtration; oil recycling; hydraulic systems and other rotating equipment such as compressors and motors.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1
- 150 psig @ 150°F (66°C) standard design pressure; custom design pressures up to 3000 psig
- -20°F/+200°F (-29°C/+93°C) standard design temperature; higher design temperatures available
- 150lb ANSI RF50 flanged inlet/outlet nozzles (additional nozzles available as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; custom flange ratings available
- standard carbon steel vertical housing; custom housing materials available
- aluminum cartridge hardware; standard cartridge lengths of 18" (457mm) and 36" (914mm); quick access cartridge replacement; custom cartridge configurations, sizes and filter media available
- 3L Pogo (spring-assisted) headlift on housing diameters 12" to 24" (305mm to 610mm); hydraulic jack headlift on housing diameters over 24" (610mm); housing dimensions under 12" (305mm) utilize handles, not headlifts; optional handwheel or 3L Cantilever headlifts available
- standard swing bolt closure; optional thru-bolt closure or patented Easy Access Closure available; O-ring closure seal available in Buna, Viton, Teflon or EPDM
- external primer finish for carbon steel housings; paint or coating to customer specifications available
- available options include three way valves, safety relief valves, pressure gauges, steam jackets and working platform
EAC - Easy Access Closure
The EAC Easy Access Closure is a patented closure design that enables any single operator or technician to open a depressurized filtration vessel without the assistance of tools and perform cartridge or bag replacement, all in less than one minute. The EAC is typically used with the vertical lift Cantilever head positioner, but can be engineered to suit many applications. It is ideal in situations where vertical bag or cartridge filters are processing a wide array of liquids, and frequent change outs are expected.
Features & Benefits At A Glance
- significant reduction of downtime for cartridge or bag change out
- opened and closed in under one minute; safe, fool-proof operation; system pre-set at our facility
- normally provided with a cantilever headlift requiring minimal force to lift lid after opening
- designed to ASME Section VIII Div. 1
- design pressure up to 150 psig; maximum temperature 200°F (93°C)
- suitable for housing diameters 18" (457mm), 22" (559mm), 24" (610mm), 30" (762mm) or 36" (914mm)
- optional anti-tamper safety lock available
- choice of carbon steel or stainless steel components
BSF - Fabricated Basket Strainer
The BSF Series Fabricated Basket Strainer removes gross particles from a liquid stream. Often used as a pre-filter placed before finishing filtration equipment, the BSF is ideal for removing large amounts of solid matter from liquids such as water, coolants, resins, adhesives, solvents, paints and inks. A removable stainless steel basket allows easy cleaning and quick change out when heavy particle loading is present.
Features & Benefits At A Glance
- designed to ASME Section VIII Div. 1
- single, duplex or multiplex arrangement
- 150 psig standard design pressure; custom design pressures up to 3000 psig
- -20°F/+200°F (-29°C/+93°C) standard design temperature
- 150lb ANSI RF flanged inlet/outlet, offset or inline configuration (additional nozzles available as needed); 3000lb NPT couplings for vent, drain and pressure gauge connections; custom flange ratings available
- carbon steel standard housings; custom housing materials available
- perforated stainless steel (SS304 or SS316) basket construction; strainer baskets available in a range of materials and mesh sizes
- 3L Pogo (spring-assisted) headlift on housing diameters over 12" (305mm); housing dimensions under 12" (305mm) utilize handles, not headlifts; optional handwheel or 3L Cantilever headlifts available
- quick basket replacement access
- standard swing bolt or thru-bolt closures; optional patented Easy Access Closure available; O-ring closure seal available in Buna, Viton, Teflon, Silicone or EPDM
- external primer finish and internal epoxy coating for carbon steel housings; electropolishing and/or passivation of stainless steel housings available; paint or coating to customer specifications available
- available options include valves, safety relief valves, pressure gauges and working platform
Pressure Vessels
3L Filters™ has over 40 years of experience in the design and fabrication of tanks and pressure vessels. Our engineering group can perform complete stress and seismic analysis and design registration. 3L Filters™ has registered Quality Assurance Programs for nuclear and non-nuclear applications.
In addition to tanks and pressure vessels, other applications include boiler shells and filter housings for most uses. 3L Filters™ has special expertise for nuclear, oil and gas, pertrochemical, water treatment and environmental applications.
Capabilities
- fabrication in carbon steel, stainless steel, aluminum or other specialty materials
- experienced, qualified welders
- GMAW, SMAW, SAW and GTAW welding methods
- large library of approved welding procedures
- 25 ton lift capacity
- in-house machining, blasting and painting
- in-house and third-party NDE testing
- in-house pressure and performance testing
- maximum diameter is 14 ft. (back door is 15 ft.)
Certifications
|
Certificate No. |
Agency |
Applicable Symbol or Standard |
Description / Product Class |
|
N/A |
National Board |
 |
Manufacture of boilers, pressure vessels or other pressure retaining items to ASME code - U, S and UM stamps |
|
13,616 |
ASME |
 |
Manufacture of pressure vessels |
|
34,098 |
ASME |
 |
Manufacture and assembly of power boilers |
| |
|
 |
Manufacture of miniature pressure vessels |
|
QA72 |
TSSA |
ASME Sec. VIII Div. 1
CSA B51 |
Manufacture of pressure vessels to ASME Boiler and Pressure Vessel Code, Section VIII Division 1; and CSA Standard B51 Boiler Pressure Vessel and Pressure Piping Code |
|
QA39 |
TSSA |
CSA N285.0 |
Construction of Class 1, 2, 3 & 4 Vessels and supports; in accordance with CSA Standard N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants |
|
4023-3-053 |
CANPAC (Auditors) |
CSA Z299.2 |
Manufacture of cartridge type filters, strainers, separators, purifiers, pressure vessels, tanks, and appurtenances and distribution of associated parts |
|
N/A |
ASME |
 |
The accreditation, projected for mid 2010, will include the "N" stamp and "NPT" stamp Certificates of Authorization, and a quality program in accordance with ASME NQA-1, 10 CFR 50 Appendix B and ANSI N45.2. "N" stamp will be placed on complete pressure components that are designed and manufactured in compliance with the ASME Code. "NPT" stamp will be placed on parts designed and constructed in compliance with the ASME Code that may be provided to another N-certificate holder for incorporation into a component. |
Headlifts
All 3L Filters™ products are designed for ease of maintenance and quick access to replace bags, cartridges, canisters and filter packs. 3L Filters™ has a variety of standard and optional headlifts for specific vessel designs. Let us help you select the optimal headlift to suit your operational requirements.
Available Headlifts
- 3L Pogo - for vertical housings up to 24" (610mm) OD; spring-assisted pop-up allows lid to swing sideways for access
- Jack - for vertical housings 28" (711mm) OD and over; lever actuated lift
- Hinge - for horizontal housings of any diameter; space saving
- Davit (Handwheel) - for horizontal or vertical housings of any diameter; handle or handwheel designs available
- Cantilever - for vertical housings from 18" (457mm) to 36" (914mm) OD; hinged lid for all vertical positions, 0 to 90 degrees; Class 1 lever; complements the Easy Access Closure; less area required for maintenance
Closures
3L Filters™ offers three closure options to suit a broad range of industries and process conditions. 3L Filters™ closures are designed to save time when opening and closing.
Available Closures
- Thru-Bolt - for vertical and horizontal housings; suitable for any temperature or pressure; o-ring, flat gasket and spiral wound seals available
- Swing Bolt - for vertical or horizontal housings; suitable up to 200°F (93°C); uses elastometer o-ring seal; bolting stays attached when released; quicker change out than thru-bolt closure
- Easy Access Closure - click here for more information
FLODRI - Flo-Dri Natural Gas Scrubbing System
The Flo-Dri Natural Gas Scrubbing System is designed for gas conditioning of fuel gas from natural gas wells at the point of use to remove aerosols, contaminants, H2S, moisture, oil and solids. This process eliminates the costly down time associated with instrument and catalytic heater failure caused by the presence of these substances. The system is engineered for long life, featuring easy cartridge change out, low pressure drop, low maintenance and low cost operation.
Features & Benefits At A Glance
- various sizes available for flow rates from 1 to 150 SCFM
- working pressures up to 250 psig
- variable flow rates with low pressure drop
- removes contaminant particles down to 0.5 micron in size, providing ultra clean gas for critical applications, thereby increasing performance and assuring longer equipment life
- 1/4" (6.35mm) or 3/4" (19.05mm) NPT inlet/outlet ports
- drain cock included
- patented "Quick Change" filters provide the easiest cartridge replacement in the industry
- a variety of cartridge media available, including Activated Carbon, Activated Aluminum, and Molecular Sieve
- designed and built in accordance with ASME standards; Canadian Registration Number (CRN) for types G-10 and G-25
CS & BS - Cone & Basket Strainer
CS & BS Series Cone & Basket Strainers are used to protect fluid and gas handling equipment by removing debris during system start-up. They are easily installed or placed between large flange faces without modifying the surrounding pipe work, and are also easily removable.
Features & Benefits at a Glance
- available in 316 stainless steel or carbon steel; media available in a selection of four perforated and five mesh styles
- flanged inside diameter is pressed and welded to prevent the cone/basket from ending up downstream and possible failure
- phonographic finish
- reinforced cones available upon request
- custom builds available upon request
AVS - AVASAN™ Filter Cartridge
High purity melt blown depth cartridges.
AVASAN™ (AVS) cartridges are manufactured with a proprietary melt blown manufacturing process using a specially formulated polypropylene polymer. This formulation provides a uniquely graded density filter cartridge designed for high purity applications. The fiber matrix of the cartridge has been engineered to provide structural integrity throughout the long service life of the cartridge and the finish-free construction provides optimum fluid purity and eliminates foaming. AVASAN's inherent fluid compatibility properties plus graded density make it the economical filter choice for high clarity requirements.
Typical applications include DI water, RO prefiltration, potable water, plating solutions and chemical processing fluids.
Features & Benefits at a Glance
- continuous bonding of fibers throughout the filter matrix ensures non-fiber releasing construction
- superior inter-layer bonding provides true three dimensional filtration and a construction that does not compress with increasing pressure
- pure polypropylene construction
- finish-free construction provides optimum fluid purity and eliminates foaming
- graded density construction provides built-in prefiltration and longer life
- all materials biosafe in accordance with USP Class VI-121°C Plastic Test
- all materials listed as acceptable for potable and edible contact according to CFR Title 21
DBC - Fulflo® DuraBond™ Cartridge
Economical filtration with high strength thermally bonded depth cartridges.
Fulflo® DuraBond™ cartridges are the most economical high strength filter cartridges available. Featuring an integral rigid thermally bonded construction, the DuraBond™ provides consistent filtration for a wide variety of fluids. Its fixed pore structure acts as a sieve-like particle "classification" filter for pigmented coatings allowing pigments to pass while stopping large agglomerates.
Fulflo® DuraBond™ cartridges are available in nominal ratings of 1µm, 3µm, 5µm, 10µm, 25µm, 50µm, 75µm and 100µm.
Typical applications include photographic chemicals, DI water, plating solutions, bleach, RO prefiltration, organic solvents, oilfield fluids, membrane prefiltration, industrial coatings, magnetic coatings, potable water and processing fluids.
Features & Benefits at a Glance
- fixed pore structure provides efficiency, integrity and optimum particle retention
- thermally bonded bicomponent fiber matrix provides rigid dimensionally stable construction without fiber migration
- rigid construction eliminates contaminant unloading and channeling
- corrugated porous surface maximizes dirt holding capacity
- silicone free construction will not change coating properties
- FDA grade polypropylene (DOE only) certified to ANSI/NSF61 standard for contact with drinking water components
- polyolefin construction provides broad chemical compatibility for a variety of applications
- all materials of construction are FDA listed as acceptable for potable and edible liquid contact according to
CFR Title 21
- DuraBond™ cartridges can be easily disposed by shredding, incinerating or crushing
- DuraBond™ construction provides particle "classification" effect with pigmented coatings
- double-open-end style is self-sealing without separate gasket material
EBC - Fulflo® EcoBond™ Filter Cartridge
High purity filtration with low cost melt blown depth cartridges.
Fulflo® EcoBond™ cartridges are the most economical high purity filter cartridges available. Featuring a graded density matrix of uniform polypropylene fibers, the EcoBond™ provides consistent filtration for a wide variety of fluids. No fiber finish or surfactants are present to generate extractables leading to foaming or other undesirable effects on the filtrate.
Fulflo® EcoBond™ cartridges are available in nominal ratings of 1µm, 5µm, 10µm, 25 µm and 50µm.
Typical applications include photographic chemicals, DI water, plating solutions, RO prefiltration, membrane prefiltration, organic solvents, oilfield fluids, bleach, potable water and chemical processing fluids.
Features & Benefits at a Glance
- thermally bonded melt blown fiber matrix provides dimensionally stable construction
- continuous fiber matrix prevents media migration and ensures consistent quality filtration performance
- finish-free construction provides optimum fluid purity and eliminates foaming condition
- superior inter-layer bonding eliminates contaminant unloading and channeling
- FDA grade polypropylene (DOE only) certified to ANSI/NSF61 standard for contact with drinking water components
- narrow range fiber size optimizes consistency of filtration performance
- polypropylene construction provides broad chemical compatibility for a variety of applications
- all materials of construction are FDA listed as acceptable for potable and edible liquid contact according to
CFR Title 21
- single component construction simplifies compatibility options and provides easy disposal
Fulflo® Honeycomb™ Filter Cartridge
Multipurpose filtration solutions with wound depth cartridges.
Wound cartridges provide true depth filtration utilizing hundreds of tapered filtering passages of controlled size and shape. Each layer of roving contributes to true depth filtration by trapping its share of particles. Wound cartridges offer a gradual pressure increase during cartridge life versus surface-type media that have an abrupt flow cutoff when loaded. In addition, the irregular outer layer reduces surface blinding, assuring both longer cartridge life and full cartridge utilization.
Ultrafine cartridges are a unique member of the Honeycomb™ wound depth cartridge family. They are specifically designed for critical filtration applications in the 0.5µm range. When absolute 0.5µm filtration is required, the nominal Ultrafine cartridge can be used as a prefilter, thereby significantly extending membrane life. Ultrafine cartridges remove 90% of particles larger than 0.5µm in size. This type of filtration provides excellent protection for equipment or processes that must be protected from fine particles.
Effective removal ratings at nominal 90% efficiency from 0.5µm to 150µm range.
Typical applications include oxidizing agents, alkalies, potable liquids, dilute acids and alkalies, mineral acids, organic acids and solvents, petroleum oils, photo solutions, amines, water and prefiltration for membranes.
Features & Benefits at a Glance
- a broad range of media provide excellent compatibility with a variety of organic solvents, animal, petroleum and vegetable oils
- optional core covers and end treatments assure fiber migration control
- multiple length cartridges minimize changeout time, eliminate spacers and are available to fit competitive
filter vessels
- FDA grade polypropylene (DOE only) certified to ANSI/NSF61 standard for contact with drinking water components
- continuous strand winding geometry provides performance consistency
- one-piece metal extended center core option eliminates the need for cartridge guides in all competitive
and Fulflo® multicartridge vessels
- a special snap-in extender is available for polypropylene cores
- cotton, rayon, polypropylene, nylon and polyester materials are FDA listed as acceptable for potable and
edible liquid contact according to CFR Title 21
- various o-ring and end cap options are available
MBP - Fulflo® MegaBond Plus™ Cartridge
Depth Cartridges with high dirt holding capacity & absolute rated filtration efficiency.
Fulflo® MegaBond Plus™ are absolute rated depth cartridges. Using a new innovative manufacturing process, the MBP has higher dirt holding capacities offering long service life and without contaminant migration. The MBP has a fixed core inner structure of thermally bonded continuous microfine polypropylene fibers. The outer layer fixed pore structure has been modified to maximize the graded density surface area to enhance dirt holding capacity.
Fulflo® MegaBond Plus™ cartridges are available in absolute (ß = 5000) ratings of 1µm, 3µm, 5µm, 10µm, 15µm, 20µm, 30µm, 40µm, 70µm, 90µm and 120µm.
Typical applications include photographics, high technology coatings, DI water, plating solutions, chemical processing and membrane prefiltration.
Features & Benefits at a Glance
- microfine, thermally bonded fiber construction provides superior filtration and often eliminates the need for
circulation to achieve product clarity
- non-fiber-releasing, continuous fiber matrix prevents media migration and ensures consistent production yields
and overall quality filtration performance
- no surfactants or binders are present to interrupt product quality or cause foaming
- double open-end cartridges have polyolefin gaskets thermally bonded to both ends eliminating fluid bypass between the cartridge and the vessel seal
- superior inter-layer bonding eliminates contaminant unloading and channeling
- unique outer graded density structure increases dirt holding capacity
- polypropylene fiber provides broad chemical compatibility for a variety of applications
- all materials of construction are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21
- pore size differentiation is achieved using fibers of differing diameters and maintaining uniform density throughout the cartridge
- pore sizes do not change as DP increases during service, providing consistent particle retention
PRO - Fulflo® ProBond™ Filter Cartridge
A patented breakthrough in resin bonded cartridge design.
ProBond™ cartridges have a unique, proprietary two-stage filtration design to maximize particle retention and service life in viscous fluid filtration applications. An outer, spiral, prefilter wrap, made from a fiber blend of polyester and acrylic, increases cartridge strength and eliminates residual debris associated with conventional or machined and grooved, resin bonded cartridges.
ProBond™ filter cartridges are available in eight differentiated removal ratings of 2µm, 5µm, 10µm, 25µm, 50µm, 75µm, 125µm and 150µm pore sizes to meet a wide range of performance requirements.
Typical applications include paints, plasticizers, printing inks, waxes, adhesives, oilfield fluids, resins, process water, emulsions, petroleum products, chemical coatings and organic solvents.
Features & Benefits at a Glance
- outer, spiral wrap collects large particles and agglomerates, while inner layers control particle removal
at rated size
- outer wrap increases surface area and eliminates loose debris and contamination caused by machined
products
- extra-long acrylic fibers provide added strength, resist breakage and migration common with competitive
"short fiber" cartridges
- available with optimal single open-end seals (222 o-ring with flat cap) in ABS or nylon
- phenolic resin impregnation strengthens cartridge for use with high viscosity fluid
- withstands pressure surges up to 150 psid across cartridge (depending on fluid temperature)
- one-piece construction eliminates bypass concerns with multilength cartridges and eases change out
- silicone-free construction ensures no contamination to adversely affect adhesion properties of coatings
SWC - Fulflo® String Wound Filter Cartridge
Economical filtration solutions with string wound depth cartridges.
The SWC Filter Cartridge offers a wide range of fibers and core materials. Roving is wound onto a center core for strength. The
diagonal pattern of the media forms a tight, interlocking weave. Nominal removal ratings from 1µm to 100µm are available.
Typical applications include water, alkalies, dilute acids and alkalies, organic acids and solvents, potable liquids, petroleum oils, mineral acids, and as a prefilter for RO membranes.
Features & Benefits at a Glance
- provides excellent compatibility with a variety of organic solvents and petroleum products
- optional core covers available to assure fiber migration control
- multiple length cartridges minimize change out time, eliminate spacers and are available to fit competitive
filter vessels
- cotton and polypropylene materials are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21
- continuous strand roving geometry provides performance consistency
- exended center core option eliminates the need for cartridge guides in competitve and Fulflo® multicartridge vessels
- one piece extended length center cores are available in tinned steel, 316 stainless steel and 304 stainless steel
- a special snap-in extender is available for polypropylene cores
- FDA grade polypropylene (DOE only) certified to ANSI/NSF61 standard for contact with drinking water
components
XTL - Fulflo® XTL™ (Extended Life) Filter Cartridge
Technologically advanced wound cartridge design doubles cartridge life and improves performance.
The unique construction of the patented* Fulflo® XTL™ (extended life) cartridges provides twice the average life of conventionally wound cartridges for process fluid filtration. Computer modeling has optimized the wound cartridge geometry maximizing the use of the internal cartridge surface area. The enhanced design provides improved dirt-holding capacity (twice the average) over standard wound cartridges, while providing true controlled-depth filtration.
Fulflo® XTL cartridges are available in nominal (90%) ratings of 1µm, 3µm, 5µm, 10µm, 20µm and 30µm.
Typical applications include potable liquids, organic solvents, process water, photoprocessing, lubricants, RO prefiltration, amines and chemical process.
Features & Benefits at a Glance
- XTL cartridges result in significant cost savings based on fewer system interruptions, decreased labor expenses for change outs, and reduced inventory and cartridge disposal costs
- unique computer programming capability permits the design and manufacture of special cartridge constructions to suit the requirements of nearly any filtration application
- "M" polypropylene and "C" cotton materials are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21
- continuous strand roving geometry provides performance consistency
- XTL wound cartridges fit all Fulflo® vessels and most competitive vessels without compromising final product clarity or flow characteristics of the cartridge; the most noticeable difference is the extended life savings offered by XTL cartridges
- extended center cores are available in tinned steel, 316 stainless steel and 304 stainless steel
- a special snap-in extender is available for polypropylene cores
- FDA grade polypropylene (DOE only) certified to ANSI/NSF61 standard for contact with drinking water components
263 - Clariflow® General Grade Cartridge
Hydrophilic Polyethersulfone (PES) membrane for aqueous liquid filtration applications.
Clariflow® General Grade cartridges are designed for general-purpose use in the filtration of high-purity liquids and
aqueous chemicals.
The mirrored-anisotropic Polyethersulfone (PES) membrane is inherently hydrophilic and has a pore morphology that delivers exceptionally high flow rates.
Because there are no added surfactants or wetting agents, and the support layers and structure are all-polypropylene, the filter exhibits low extractables, broad chemical compatibility and good resistance to hydrolysis.
The Clariflow® General Grade cartridge is available in 0.04, 0.1, 0.2, 0.45, 0.65 and 0.8µm pore sizes.
Typical applications include chemical filtration, liquid clarification, recirculating fluids, general use water filtration and deionized water systems.
Features & Benefits at a Glance
- high flow rate reduces processing time
- broad chemical compatibility allows use in most applications
- low differential pressure reduces system wear and tear
- biosafe in accordance with USP Class VI 121°C Plastics Test
266 - Clariflow® WS Cartridge
Hydrophilic Polyethersulfone (PES) membrane for cost-effective purification.
Clariflow® WS cartridges are cost-effective alternatives to Clariflow® Electronics and General grade cartridges for the filtration of a variety of aqueous liquids.
The Clariflow® WS cartridge is built around a unique polyethersulfone (PES) membrane that is inherently hydrophilic, and contains no added surfactants or wetting agents. As such, it is known for clean filtrates, and also offers competitive flow rates, extended service life, and excellent resistance to hydrolysis.
Clariflow® WS cartridges are fabricated under cleanroom conditions.
The Clariflow® WS cartridge is available in 0.04, 0.1, 0.2, 0.45, and 0.65µm cartridges.
Typical applications include deionized water filtration, chemical filtration, liquid clarification, recirculating liquids, wine and beer clarification, juices and bottled water.
Features & Benefits at a Glance
- reliable and cost-effective to reduce expenses
- broad chemical compatibility allows use in aqueous applications
- resistance to hydrolysis allows extended use in UPW systems
- high flow rate / low differential pressure reduces system wear and tear
- biosafe in accordance with USP Class VI 121°C Plastics Test
331 - Fluoroflow® Cartridge
All-fluoropolymer cartridge for effective filtration of aggressive chemicals.
Fluoroflow® pleated filter cartridges feature an all-fluoropolymer construction; this provides the highest chemical
resistance when filtering acids, bases and solvents. Fluoroflow® cartridges fit standard filter housings and are available in a variety of filter ratings, lengths and end-fittings for maximum versatility. Fluoroflow® cartridges are available flushed with UPW to minimize extractables and wet-packed to eliminate the need for on-site wetting, to fit your needs.
The Fluorflow® cartridge is available in 0.05, 0.1, 0.2, 0.45, 1 and 100µm pore sizes.
Typical applications include aggressive chemicals and process fluids at temperatures up to 150°C, and ozonated and/or hot UPW.
Features & Benefits at a Glance
- high chemical compatibility maximizes process capability
- wet-packed option eliminates lengthy wetting procedure and minimizes equipment downtime
- biosafe in accordance with USP Class VI 121°C Plastics Test
354 - Proflow™ II General Grade Cartridge
Hydrophobic PTFE membrane for general purpose gas and solvent purification.
Proflow™ II General grade cartridges provide an economic alternative for general applications where reliable gas and liquid flow rates are required. With 5.6 square feet of expanded PTFE membrane, Proflow II-G is a highly efficient hydrophobic barrier, for the production of dry gas, and will effectively purify aggressive liquids and organic solvents.
Proflow™ II-G cartridges are manufactured under cleanroom conditions and integrity tested before shipment to assure consistent performance and quality.
Typical applications include photoresists, compressed gas, venting, electronic grade solvents and hot deionized water (less than 80°C).
Features & Benefits at a Glance
- reliable air and liquid flow rates for effective performance
- broad chemical compatibility enables use in many applications
- broad range of micron ratings for user convenience
- superior hydrophobicity for long life in vent/air applications
- integrity tested to ensure quality
- biosafe in accordance with USP Class VI 121°C Plastics Test
CP - Claripor™ Filter Cartridge
Polypropylene pleated depth media for critical process applications.
The best of pleated and depth style technologies combine in the Claripor™ pleated depth filter cartridges. The unique layered construction provides absolute retention with high flow rates and excellent gel removal. These features, in addition to Claripor™'s high
contaminant holding capacity and exceptional clarifying ability, make it an ideal choice for a wide array of critical process applications.
Claripor™ cartridges are available with polypropylene media in absolute (99.98%) micron ratings from 0.5 to 90 microns.
Typical applications include critical coatings, inkjet inks and specialty chemicals.
Features & Benefits at a Glance
- pleated construction yields high flow rates compared to traditional depth filters
- rigid cage design permits superior strength
- graded density layering for superior removal of amorphous particles
- available with all industry standard end configurations
- absolute retention ratings for critical filtration
- all materials listed as acceptable for potable and edible contact according to CFR Title 21
- manufactured with strict quality control
PAB - Fulflo® Abso-Mate™ Cartridge
Absolute, cost-effective filtration from all polyproylene cartridges.
Fulflo® Abso-Mate™ cartridges provide the ultimate in economical filtration for even the most critical process fluids. The proprietary melt blown media are rigidly controlled for reliable results time after time. Abso-Mate™ cartridges are produced without adhesives that can potentially contaminate fluids.
Abso-Mate™ Pleated Cartridges are available in 0.2µm, 0.45µm, 1µm, 2µm, 5µm, 10µm, 20µm, 40µm, and 70µm absolute rated pore sizes.
Typical applications include membrane prefiltration, chemicals, catalyst recovery, precious metal recovery and waste water.
Features & Benefits at a Glance
- absolute ratings for consistent and reliable performance (99.98%; ß = 5000)
- backwashable media, reduces replacement maintenance and cartridge disposal costs
- non-fiber releasing and contain minimal extractables
- all materials of construction are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21
- one-piece construction eliminates bypass concerns on mulitilength cartridges
- all-polypropylene construction offers wide chemical compatibility with most chemicals, acids, bases and solvents
- fused construction and continuous lengths eliminate the need for adhesives and allow accurate bubble point integrity testing
FP - Fulflo® Flo-Pac® Filter Cartridge
Superior industrial filtration from a pleated cartridge design.
Fulflo® Flo-Pac® cartridges are the perfect choice for many industrial filtration requirements. Flo-Pac® pleated cartridges contain premium grade, phenolic impregnated cellulosic filter media. This line of pleated cartridges is designed for critical filtration applications, providing long service life, high flow rate and low pressure drop.
Flo-Pac® Pleated Cartridges are available in 0.5µm, 1µm, 5µm, 10µm, 20µm, 30µm, and 60µm pore sizes (95% removal; ß = 20).
Typical applications include water soluble, coolants, quench oils, fuels, lubricating oils, hydraulic oils, EDM dielectrics, rolling mill oils, processing liquids and gasoline.
Features & Benefits at a Glance
- pleated cellulosic media allow high flow capacity at low pressure drop
- available in a variety of sizes and configurations to fit most industrial vessels
- phenolic resin impregnated to provide strength, integrity and high contaminant capacity
- high strength spiral core withstands pressure surges to 100 psid
- suitable for operating temperatures to 250°F (121°C)
- outer sleeve protects the media from damage
- ETP (electro-tin-plated) steel metal components for both aqueous and oil-based applications
- Buna-N gaskets are standard, other materials are available
FPE - Fulflo® Flo-Pac® Plus Filter Cartridge
Special construction for organic solvent filtration.
Fulflo® Flo-Pac® Plus Cartridges are the filters of choice for many industrial filtration requirements. Flo-Pac® Plus Pleated Cartridges are manufactured with premium grade, phenolic impregnated cellulosic filter media for long service life, high flow rate and low pressure drop. Unique epoxy resin bonding of end caps, pleat side seal and gaskets provides excellent resistance to most organic solvents.
Flo-Pac® Plus Pleated Cartridges are available in 0.5µm, 1µm, 5µm, 10µm, 20µm, 30µm, and 60µm pore sizes (95% removal; ß = 20).
Typical applications include: aromatic hydrocarbons (toluene, xylene, benzene); ketones (acetone, isophorone, methylethyl ketone); ethers (THF, dioxane); amines (DEA, TEA, DMEA); glycols (ethyl acetate, cellosolve acetate); aliphatic hydrocarbons (hexane, pentane, naphtha); halogenated hydrocarbons (methylene chloride, perchloroethylene); esters (EG, PEG, DEG).
Features & Benefits at a Glance
- epoxy bonding of end caps, pleat side seal and gaskets provides resistance to most organic solvents
- premium pleated cellulosic media allow high flow capacity at low pressure drop
- available in a variety of sizes and configurations to fit most industrial vessels
- impregnated phenolic resin provides strength, integrity and high contaminant capacity
- suitable for operating temperatures to 250°F (121°C)
- perforated outer metal sleeve protects the media against damage
- ETP (electro-tin-plated) steel metal components for aqueous and oil-based applications
- gaskets provide positive seals and are available in Viton, cork and standard Vellumoid
- recommended range is pH 4-10; please call for specific recommendation
- spiral core withstands pressure surges to 100 psid
MXG - Fulflo® MaxGuard™ Filter Cartridge
MaxGuard™ high capacity cartridge.
The MaxGuard™ high capacity cartridge product line provides a cost effective alternative to bag media or standard 21/2" cartridges for high flow applications. Each MaxGuard™ cartridge has a 6" nominal outside diameter and can handle flows up to 90 gpm, significantly reducing the number of cartridges required for large flow applications.
MaxGuard™ cartridges are available in polypropylene, cellulose and Nomex™ media. All cartridges feature an industry standard 226 positive O-ring seal and easy-to-grasp integrated handle.
Typical applications include deep well injection, amines, commercial water and food & beverage.
Features & Benefits at a Glance
- high flow capacity means fewer cartridges and reduced labor costs associated with change-out
- high flow capacity allows for smaller housings and less capital expenditure
- heavy wall core ensures superior strength
- integrated handle makes changeouts fast, easy and safe
- positive 226 O-ring seal assures filtration integrity
- absolute retention ratings for critical filtration
- polypropylene cartridges listed as acceptable for potable and edible contact according to CFR Title 21
- manufactured with strict quality control
MCN - Fulflo® MegaFlow™ Filter Cartridge
High flow capacity pleated filter cartridges.
Fulflo® MegaFlow™ cartridges provide a cost effective alternative to wound and other 2 1/2" OD style filter cartridges in high flow applications such as reverse osmosis pre-filtration and similar applications where nominal efficiency is sufficient. Each MegaFlow™ cartridge can handle flow rates up to 175 gpm (662 lpm), significantly reducing the number of cartridges required and the housing size. Each 6" (152 mm) diameter MegaFlow™ cartridge has flow capacity equal to 8 standard 2 1/2" OD x 40" long filter cartridges. Positive o-ring seals and a built in handle make cartridge installation reliable, fast and easy.
MegaFlow™ cartridges are available in either pleated polypropylene or cellulose media with nominal ratings of 0.5, 1, 5 and 10 micron.
Typical applications include potable water, waste water, reverse osmosis pre-filtration, lubricating oil and coolants.
Features & Benefits at a Glance
- high flow capacity means fewer cartridges and reduces labor costs to change
- high flow capacity allows smaller housings and less capital expenditure
- built in handle makes change fast, easy and safe
- o-ring seal assures filtration integrity
- choice of polypropylene or cellulose media allows use in both aqueous and non-aqueous fluid applications
- thermally bonded polypropylene and phenolic resin bonded cellulose filter media prevent particle bleed through and unloading that commonly occurs with wound cartridges
- high surface area pleated design provides lower pressure drop and longer service life than other cartridges
- all materials of construction in polypropylene cartridges comply with FDA regulations per CFR Title 21
- horizontal and vertical housings are available for flow rates up to 3,325 gpm (12,586 lpm)
MFA - Fulflo® MegaFlow™ Plus Filter Cartridge
Absolute rated, high flow capacity, pleated filter cartridges.
Fulflo® MegaFlow™ Plus cartridges are ideally suited for high flow applications where absolute particle removal is required. Each MegaFlow™ Plus cartridge can handle flow rates up to 175 gpm (662 lpm), significantly reducing the number of cartridges required, as well as the housing size. Each 6" (152 mm) diameter MegaFlow™ Plus cartridge has flow capacity equal to 8 standard 21/2" OD x 40" long cartridges. Positive o-ring seals and a built in handle make cartridge installation reliable, fast and easy.
MegaFlow™ Plus cartridges are available with pleated polypropylene media for use in a wide variety of fluids. Absolute ratings range from 1 µm to 150 µm.
Typical applications include potable water, vegetable oil, wastewater, lubricants, food & beverage and coolants.
Features & Benefits at a Glance
- high flow capacity means fewer cartridges and less time to change
- high flow capacity allows smaller housings
- built in handle makes change fast, easy and safe
- o-ring seal assures filtration integrity
- choice of polypropylene media expands fluid compatibility
- high surface area pleated design provides low pressure drop and long service life
- polypropylene cartridges comply with FDA regulations per CFR Title 21
- horizontal and vertical housings available for flow rates up to 3,325 gpm (12,586 lpm)
RCP & RMG - Fulflo® ParMax™ Filter Cartridge
Large-diameter high-flow elements.
The best of pleated and large diameter technologies are combined in the ParMax™ high flow filter cartridges. ParMax™ cartridges are available with polypropylene and microfiberglass media in absolute (99.98%) ratings from 1 to 90 micron. The unique layered construction provides excellent retention across a wide range of flux rates. One 6" diameter cartridge can handle up to 500 gpm flow (60" length). The inside-to-outside flow allows for a high contaminant holding capacity. High flow and a long filter life make the ParMax™ an ideal choice for a wide variety of critical process applications.
Typical applications include process water, water, spirits and food & beverage.
Features & Benefits at a Glance
- large diameter yields much higher flow rates compared to traditional 2.5" filters
- high flow capacity permits use of fewer elements and cuts capital expenditure
- inside-out flow pattern ensures positive capture of contaminants
- absolute retention ratings for critical filtration
- all materials listed as acceptable for potable and edible contact according to CFR Title 21
- manufactured with strict quality control
PB - Fulflo® Pleated Bag Series
High quality, consistent filtration performance.
The Fulflo® Pleated Bag (PB) series is a high-capacity product line that provides a cost-effective alternative with higher removal efficiencies over standard bag media configurations. Utilizing a unique "Select" pleat design along with proprietary media configurations, we are able to optimize the pleat pack surface area to maximize the service life within each configuration. The Fulflo® PBs are available in several polypropylene formats: Poly-Mate™ Plus, Poly-Mate™ and Claripor™. In addition, it is available with our Glass-Mate™ media.
This product is designed to fit within existing bag filter vessels without any hardware changes, and incorporates an easy to grasp integrated handle for quick removal.
Typical applications include intermediates & fine chemicals, amines, commercial water, deep well injection, catalyst recovery, vegetable oils, and paints & inks.
Features & Benefits at a Glance
- high capacity reduces the number of filters required, resulting in fewer changouts and lower filtration costs
- high capacity allows for smaller housings and less capital expenditure
- inside/outside flow captures and retains contaminates to eliminate potential fouling downstream
- range of sealing configurations meets the majority of housing requirements
- several media types are available for a wide variety of applications
- manufactured with strict quality control
- polypropylene cartridges listed as acceptable for potable and edible contact according to CFR Title 21
PCC - Fulflo® PCC (Pleated Cellulosic) Cartridge
Unique cartridge construction improves particle retention, service life and flow rates.
Fulflo® Pleated Cellulosic Cartridges meet a broad range of critical filtration applications. Each cartridge in the Fulflo® Pleated cellulosic series is manufactured with premium grade, phenolic impregnated, cellulosic filter media. Phenolic resin locks the cellulosic fibers into a rigid, porous matrix. This structure provides superior particle removal and particle retention performance under the most severe conditions.
Fulflo® Pleated Cartridges are available in 2µm, 3µm, 10µm, 30µm and 60µm pore sizes (99%+ removal: ß = 100).
Typical applications include chemical, process gas, oil field, petroleum, photographic, coatings, paint, film & paper, ink & resins, metal treatment, process water, synthetic fibers and recording media.
Features & Benefits at a Glance
- premium pleated cellulosic media allow high flow capacity at low pressure drop
- available in a variety of cartridge lengths and end cap configurations to fit most industrial vessels
- phenolic resin impregnated to provide strength, integrity and high contaminant capacity
- high flow rates permit the use of smaller vessels and fewer cartridges
- lower ΔP reduces power requirements and pump wear and tear
- longer cartridge life reduces frequency of filter change out resulting in less disposal costs, reduced inventory and less process interruptions
PM & PXD - Fulflo® Poly-Mate™ Filter Cartridge
Quality, economical filtration for critical process applications.
Poly-Mate™ cartridges incorporate a unique combination of polypropylene melt blown and spunbonded media to provide high surface area, finish-free and non-fiber releasing filtration. All-polypropylene construction maximizes chemical resistance to acids, bases, salts, and most organic solvents.
Poly-Mate™ pleated cartridges are available in 0.5µm, 1µm, 5µm, 10µm, 30µm, and 60µm pore sizes (99% removal; ß = 100).
Typical applications include disposal wells, photographic, wastewater, high technology coatings, RO membrane prefiltration, plating chemicals, fine chemicals, process water, deionized water.
Features & Benefits at a Glance
- high efficiency rated for critical process applications (99% efficiency)
- high pleated surface area for extended service life, low pressure drop and high flow capacity
- Poly-Mate™ Xtra Duty™ (PXD) cartridge features glass-filled polypropylene core for high temperature and high pressure use with rigid outer cage supporting pleated media in backwash applications
- optional stainless steel o-ring adapter inserts provide added strength for in situ sterilization
- Poly-Mate™ Xtra Duty™ cartridges are available with backwashable construction, reducing replacement maintenance and cartridge disposal costs
- all materials of construction are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21
- one piece, continuous to 40" length, integrally sealed pleated filter media
PMP - Fulflo® Poly-Mate™ Plus Cartridge
High surface area and high efficiency all-polypropylene pleated cartridges.
Fulflo® Poly-Mate™ Plus cartridges, made of pleated polypropylene microfiber, provide high efficiency and high purity filtration. The high efficiency of the Poly-Mate™ Plus line makes it an ideal membrane prefilter or cost-effective alternative to membrane cartridges
in a wide range of applications.
Poly-Mate™ Plus pleated cartridges are available in the following pore sizes (nominal rating at 90%): 0.25µm, 0.45µm, 0.8µm, 2.0µm, 3.0µm, 5.0µm, 30.0µm, 50.0µm, 100.0µm
Typical applications include DI water, process water, magnetic media, plating chemicals and membrane prefiltration.
Features & Benefits at a Glance
- all-polypropylene media and construction meet a broad range of performance requirements
- one-piece integral construction is 100% bonded for maximum cartridge integrity
- high surface area design provides superior flow rates and extended service life
- all materials of construction are FDA listed as acceptable for potable and edible liquid contact according to CFR Title 21
- fixed pore construction provides ultimate particle retention
- major end seal options are available to fit most standard vessels
- non-fiber releasing and ensure consistent quality filtration performance
336 - Fulflo® 336 Pleated Cartridge
Pleated cartridge construction improves filtration efficiency, dirt holding capacity and flow rates.
Fulflo® Pleated 336 size filter cartridges provide highly efficient removal of solid contaminants from a variety of petrochemical, refinery and oilfield applications. Cartridges are manufactured from premium grade phenolic impregnated cellulose and polypropylene blown media. These structures provide superior removal efficiency. The cartridges are available in 3µ, 10µ, 12µ, 22µ, and 100µ pore sizes. (99.98% removal; ß = 5000).
Typical applications include petrochemical, refineries, oil fields, produced water, amines and glycols.
Features & Benefits at a Glance
- retrofits housings that use 3" OD x 36" long SOE cartridges with spring
- high surface area
- low pressure drop
- materials compatible with most applications
- high filtration efficiency
- high dirt-holding capacity
- rugged construction
1401 - Fulflo® 1401 Pleated Cartridge
High efficiency, flow rate, dirt holding capacity & high pressure pleated cartridges.
Fulflo® 1401 cartridges are designed to replace similar competitive cartridges in high pressure water injection & disposal, gas streams and fluid processing. The cartridges are available in cellulosic and polypropylene media. Fulflo® 1401s are available in absolute ratings of 2.5, 6, 10, 12, 22, and 100 microns (ß = 5000, 99.98%).
Typical applications include water injection, solvents, acids, chemicals, hydrocarbons and water.
Features & Benefits at a Glance
- retrofits into compatible housing that use 1401 style cartridges
- maximize surface area to prevent particle bridging
- high filtration efficiency
- low pressure drops
- high flow rates
- internal o-ring seal for positive sealing
- rugged construction
PMG - Glass-Mate™ Plus Cartridge
Absolute and economical filtration with pleated microfiberglass cartridges.
Glass-Mate™ cartridges offer an economical choice for absolute-rated efficiency, high flow rate capability and long service life. A wide variety of construction components, end fittings and seal options make this product line ideal for prefiltration and point-of-use filtration
for many industrial applications.
Glass-Mate™ cartridges are available in 0.45, 1, 2, 3, 5, 10, 20 and 40µm absolute-rated pore sizes.
Typical applications include chemicals, coatings, water and RO prefiltration.
Features & Benefits at a Glance
- absolute-rated media provides reliable removal efficiency
- thermal bonding eliminates particle bypass
- laminated media/support layer maximizes flow capacity and media utilization and minimizes media migration
- variety of construction/seal options for increased compatibility
- end fitting options provide competitive housing retrofit capability
- all FDA listed components biosafe per USP Class VI-121°C Plastic Tests allows filtration of edible and potable liquids
- high surface area yields high flow rate, low differential pressure
- non-fiber-releasing media with minimal extractables provides high purity filtrate
MP - Orifice (Metering) Plate Tool
An orifice meter is a device used to measure the rate of fluid flow in a pipe. Fluid flows through a pipe at a certain velocity and pressure. When the fluid reaches the orifice plate, it converges and is forced through the small hole of the plate, altering the flow rate.
Features & Benefits at a Glance
- available in 316 stainless steel or carbon steel
- phonographic finish
- custom build available upon request
PS - Plate Strainer Tool
Plate strainers are used to protect fluid and gas handling equipment by removing debris during the start-up of a system. These are easily installed or placed between large flange faces without modifying the surrounding pipe work, and are easily removed.
Features & Benefits at a Glance
- available in 316 stainless steel or carbon steel
- phonographic finish
- 14 gauge perforated material with 1/8" holes on staggered centers
- custom build available upon request
SSF - Stainless Recleanable Filter
3L Filters™ stainless recleanable filters provide effective filtration for gasses and fluids in high temperature and flow
rate applications. 3L Filters™ recleanable filters are available in flat wrap or pleated format and offer flexibility in particle removal ratings, size choices and end cap configurations.
The SSF Series is ideal for a variety of applications, including aggressive gasses, catalyst recovery, caustic cleaning solutions, corrosive fluids, heat transfer fluids, high temperature applications, mot melt processes, hot wax, polymer filtration, process steam and viscous fluids.
Features & Benefits at a Glance
- 20 standard particle removal ratings from 2 to 800 micron; various nominal particle size removal options
- available in 304 and 316 stainless steel for aggressive chemicals; stainless steel wire cloth filter media; optional perforated stainless pleat protectors available to minimize handling damage
- available with a range of grommet and O-ring materials to optimize fluid and temperature compatibility, including Buna N, EPDM and Viton
- maximum operating temperatures of 1100°F (593°C) for NPTF and NPTM styles, 400°F (204°C) for any cartridge style with Viton O-ring or grommet, and 250°F (121°C) for any cartridge style with Buna N O-ring or grommet
- collapse pressure for the standard core is 100 psi and high pressure core is 300 psi; maximum recommended operating differential pressure is 50 psi for flat wrap and 25 psi for pleated; maximum operating pressure is 2500 psi for the CF Series and 2000 psi for the CP Series; 50 psi Delta P for the CF Series and 25 psi Delta P for the CP Series; Collapse pressure of 150 psi Delta P
- flow rates vary based on micron rating and viscosity of fluid filtered (call for information on the rating for your application, micron rating and fluid)
- large selection of seal configurations allows retrofit of many filter designs
- meets FDA guidelines with optional seal materials, for use with potable and edible liquids
Nuclear Products - Overview
CCI Thermal Technologies Inc. products for nuclear applications are designed and manufactured to suit CANDU, PWR and BWR Nuclear Reactors. Our products adhere to a rigorous Quality Assurance program in compliance with ASME NQA-1, ensuring design and construction in accordance with the requirements of ASME Boiler and Pressure Vessel Code Section III Div. 1, Nuclear CL-1, CL-2 and CL-3. Additionally, our Quality Assurance program complies with the requirements of CAN/CSA N285.0-95, specific to CANDU Nuclear Power Plants.
Capabilities
- fabrication in carbon steel, stainless steel, aluminum or specialty/exotic materials
- GMAW, SMAW, SAW and GTAW welding methods
- experienced qualified welders
- large library of approved welding procedures
- 25 ton lift capacity
- in-house machining, blasting and painting
- in-house and third-party NDE testing
- in-house pressure and performance testing
- control and instrumentation system design
- PLC programming and testing
- heating, filtration and pressure vessel technology selection
- application expertise
- design and manufacture for skids or packages
- materials selection
- mechanical and electrical design
- pressure vessel design
- project engineering management
- safe or hazardous area selection
- FEA analysis, including stress, seismic and thermal analysis
- design registration
Nuclear Products - Filters
3L Filters™ designs and manufactures filter systems for Nuclear Steam Supply System (NSSS) and Balance of Plant (BOP) applications. Specific designs are available for CANDU, PWR and BWR nuclear applications, and filters are designed for remote or robotic operation to minimize exposure of maintenance personnel to radiation hazards.
Filter systems include ASME compliant vessels together with filter media validated for nuclear applications. Filter cartridges are available down to 0.1 micron, and are optimized for high dirt holding capacity and low differential pressure.
Application Examples
- primary heat transport
- spent fuel cleaning systems
- steam generator blowdown filtration
- seal water injection filters
- resin retention filters
- laundry water rinsing filters
- borated water filters
- boric acid evaporator feed demineralizer filters
- Control Rod Drive (CRD) mechanism pump suction and discharge filters
Nuclear Products - Ion Exchange Columns
Ion exchangers employ vessels or columns containing nuclear grade ion exchange resins to remove undesirable ions from process water. They are supplied with cation, anion or mixed bed resins, and are designed to avoid channeling and provide uniform flow across resin beds. Internal removable screens allow for easy maintenance.
Application Examples
- process water demineralization
- boiler feed water demineralization
- boric acid evaporator feed demineralization
- de-borating demineralization
Nuclear Products - Restriction Orifices & Flow Elements
Restriction orifices and flow elements are used for flow restriction, pressure control and accurate flow measurement. Restriction orifices are available as flat plate orifices mounted between two pipe flanges, and are designed for unidirectional or bi-directional flow. Flow elements consist of a single orifice or multiple orifices machined inside of a tube, and are available as single stage or multiple stage units for achieving very high pressure differential.
Orifices and flow elements are designed to maintain 1% accuracy over extended periods of operation.
Application Examples
- calandria feeder tube
- moderator purification system
- heat transport auxiliary system
- primary heat transport pressure system and vent system
- boiler blowdown system
- emergency core cooling system
Nuclear Products - Strainers
Nuclear class strainers are used for protection of downstream equipment and are available as cast Y strainers, T strainers, fabricated in-line strainers, pipe insert strainers and duplex strainers.
Strainers employ removable baskets designed using woven wire-mesh sandwiched between perforated stainless steel sheets to provide high rupture strength. Basket volume selection is based on dirt loading and desired change-out frequency.
Application Examples
- pump suction and discharge
- seal water systems
- resin retention system strainers
- fuel oil strainers
- Chemical Volume Control System (CVCS) borated water system strainers
- sea water wash system strainers
- emergency core cooling strainers
- systems that require gross filtration
Nuclear Products - Vapour Recovery Dryers
Vapour Recovery Dryers remove heavy water vapour within reactor buildings. Desiccant adsorbs atmospheric moisture during an adsorption cycle. A regeneration cycle directs hot dry air through the desiccant, expelling moisture to condense and reprocess for reuse. Units are available in single tower configurations, where continuous operation is not necessary, as well as dual tower configurations, where continuous operation is desired. A Rotating Drum design is also available.
Application Examples
- vault area recirculation dryer
- vault exhaust dryer
- moderator area recirculation dryer
- accessible area recirculation dryer
- boiler room recirculation dryer
Engineered Products & Skid Packages
3L Filters™ has designed, manufactured and tested a wide variety of custom-engineered products and complete skid-mounted systems. 3L Filters™ has special expertise in liquid filtration systems for nuclear, petrochemical, water treatment and environmental applications.
Our experienced engineering team has created systems for a multitude of markets and customers. We apply our in-house talents to accommodate all aspects of design, from piping and structural to instrumentation and PLC programming. Systems can be designed to meet ASME codes, seismic requirements and military specifications as required.
With designs on file from hundreds of successful applications, 3L Filters™ can provide a custom-engineered system that is guaranteed to perform to the customer's specifications.
Capabilities
- stress analysis, seismic analysis and design registration
- fabrication in carbon steel, stainless steel, aluminum or specialty/exotic materials
- GMAW, SMAW, SAW and GTAW welding methods
- experienced, qualified welders
- large library of approved welding procedures
- 25 ton lift capacity
- in-house machining, blasting and painting
- in-house and third-party NDE testing
- in-house pressure and performance testing
- control and instrumentation system design
- heating, filtration and pressure vessel technology selection; materials selection
- mechanical and electrical design; PLC programming and testing
- pressure vessel design
- FEA analysis, including stress, seismic and thermal analysis
Engineered Products and Skid Systems - Example Projects
- Groundwater Recovery Systems
- Fuel Forwarding Skids
- Gas Separator Assemblies
- Automotive Paint Systems
- Oil Coalescers
- Vapour Recovery Dryers
- Amine Filtration Skids
- Turbine Polishing Filtration Skids
- Turbine Fuel Gas Filter Separator Packages
- Turbine Jet Fuel Polishing Filtration Skids
- Helicopter Refueling Systems
- Fuel Pumping Stations
- Water Filtration Skids
- Boiler Condensate Polishers
- Natural Gas Purification Skids
- Biogas Separators for Municipal Landfill
- Offshore Drilling Platform Fuel Dispensing Skids
- Ion Exchanger Skids
Replacement Parts & Accessories
To ensure peak performance of 3L Filters™ equipment, use only certified 3L Filters™ original quality replacement parts and accessories.
Standard parts are usually available from our stock. Custom parts are fabricated quickly and accurately from our drawings, and are designed to ASME Section VIII Div. 1.
Available Parts and Accessories
- Cartridge Mounting Hardware
- O-rings and gaskets for housings
- Replacement Closure Bolting
- Valves - for shut-offs, transfer, 2-way or 3-way
- Differential Pressure Gauges & Transmitters
- Liquid Level Gauges, Switches & Transmitters
- Safety Reliefs
- Air Eliminators
- Sump Heaters
Filter Separator Accessories
- Water Slug Shut-Off Device: An automatic water discharge system, which is recommended for Filter Separator installations to prevent carry-over of accumulated water. Systems can also be equipped with a rate-of-flow control feature which will reduce or isolate the flow on high water levels.
- Water Dump Valve (Mechanical Float Type): These float valves operate on the interface between two liquids, and only a slight difference in specific gravity is required to operate the valve.
- Air Eliminator: Float-operated air eliminators exhaust trapped air during filling of the vessel. When air is exhausted and liquid fills the vessel dome, the float lifts to shut the valve.
|
HEATERS » Air & Space Band, Strip & Tubular (Calrod® type) Boilers & Calorifiers Circulation Convection - Explosion-Proof Convection - Natural Explosion-Proof Elements Gas Preheating Heavy-Duty, Explosion-Proof Immersion (Flange, Screwplug, etc.) Infrared Catalytic Line & Pipeline Specialty Transit Industry
