CCI Thermal Technologies Inc.

Process Systems

Process System Products

CCI Thermal Technologies Inc. is uniquely positioned to offer fully integrated Process Systems for the most demanding industrial applications. The range of our technologies enables equipment from our various brand lines to be combined into one perfect turnkey package solution.

Adhering to the highest Quality Control and Manufacturing approvals and certifications, CCI Thermal provides safe, well built, and fit for purpose systems.

From Nuclear to Natural Gas, Power Generation to Petrochemical, Oil & Gas to Water & Environment, CCI Thermal provides engineering, design, and manufacturing expertise unsurpassed in the industry. There is virtually no custom heating or filtration project we cannot achieve.

Product Brochure Drawing
Process Systems Brochure
Line Heaters Brochure Drawing
Fuel Gas Conditioning Systems Brochure
Seal Gas Heaters
Ammonia Vaporization Systems Drawing
Heat Transfer Systems Brochure
Specialized Water Treatment
Nuclear Products Brochure

Engineering & Design Expertise

CCI Thermal provides engineering, design, and manufacturing expertise unsurpassed in the industry. There is virtually no custom heating or filtration project we cannot achieve.

  • Total integration of mechanical, electrical, instrumentation and controls into fully engineered process packages for hazardous and non-hazardous locations.
  • Custom pressure vessels, process piping, heating, filtration and process engineering, design and manufacturing.
Process Analysis
  • Process simulation and optimization – Aspen HYSYS
  • Computational Fluid Dynamics (CFD) simulation
Seismic Analysis
  • Finite element analysis
  • Modal analysis
  • Static equivalent analysis
  • Response spectrum analysis
  • Code compliance – NBC, CBC, IBC, ASCE-7
Stress Analysis
  • Finite element analysis – ANSYS
  • COMPRESS code calculation – ASME Sect. VIII Div. 1 and Div. 2
  • MathCAD and in-house stress analysis software
Design Registration & Code Compliance
  • ASME Sections I, III Div. 1, IV, VIII Div. 1 & 2
  • CSA B51 & N285
  • ASME B31.1, B31.3

Manufacturing Capabilities

  • Over 100,000 sq. ft. manufacturing facility
  • Fabrication in carbon steel, stainless steel, aluminum or specialty/exotic materials
  • GMAW, SMAW, SAW and GTAW welding methods
  • Experienced, qualified welders
  • Large library of approved welding procedures
  • 25 ton lift capacity
  • In-house machining, blasting and painting
  • In-house and third-party NDE testing
  • In-house pressure and performance testing

Description: 3L Filters™ Carbon Bed Adsorption Filter – 40,000 lbs, 12 ft diameter by 20 ft length, 219 psi @ 194°F

Quality Control & Approvals

SymbolDescriptionSupport
ISO 9001 Quality Management Systems More Information
Certificate of Authorization to practice professional engineering in the design and application of our equipment More Information
Authorized to engage in the Practice of Engineering in the Province of Alberta More Information

Most products have agency approvals.

With custom equipment we often utilize special inspection services of these organizations.

 
 
IEC System for Certification to Standards relating to Equipment for use in Explosive Atmospheres (IECEx System) More Information
ASME Sections I, III, IV and VIII Div.1 & 2 Boilers and Pressure Vessels N, NPT, H, U, U2, S, and R Stamps and National Board Registration More Information
ASME Section I, IV, and VIII Div. 1 and CSA standard B51, Boiler, Pressure Vessel and Pressure Piping Code More Information
ASME Section III Class 1, 2, 3 Nuclear Components to N285.0 Boilers and Pressure Vessel Code More Information
Chinese Safety Quality License for Import Boilers and Pressure Vessels More Information
Eurasian Conformity
 
ASME Nuclear Certification More Information
Nuclear Class and Non-Nuclear Class Heaters and Filtrations Components and Pressure Vessels

Quality & Manufacturing Certifications

Certificate No.Applicable SymbolsManufacturing LocationDescription/Product ClassProducts Covered
0079844 Edmonton Quality Management System All Products
10643 Edmonton Quality Management System Filters and Heat Exchangers
SIRA 13
ATEX M583
Edmonton Quality Assurance Notification Electric Air Heaters
0097803 Houston Quality Management System All Products
0083600 Oakville Quality Management System All Products
SIRA 14
ATEX M609
Oakville Quality Assurance Notification Immersion and Circulation Heater Products
NONE Oakville Manufacture of Boilers and Pressure Vessels to ASME Code – H, S & U, U2 Stamps Pressure Vessels & Boilers
27,440 Oakville Manufacture and Assembly of Power Boilers Steam Boilers and Pressure Vessels
27,441 Oakville Heating Boilers Except Cast Iron and Cast Aluminum Hot Water Boilers and Pressure Vessels
27,443 Oakville Manufacture of Pressure Vessels Pressure Vessels (Other than Hot Water and Boilers)
38,138 Oakville Manufacture of Miniature Pressure Vessels Pressure Vessels
48,340 Oakville Manufacture of Pressure Vessels Pressure Vessels
N-3578 Oakville Construction of Class 1, 2 & 3 vessels; and Class 1, 2 & 3 Shop Assembly Steam Boilers and Pressure Vessels
N-3579 Oakville Class 1, 2 & 3 Fabrication Without Design Responsibility and Class 1, 2 & 3 Fabrication With Design Responsibility for Appurtenances Steam Boilers and Pressure Vessels
QA 126 Oakville Manufacture of Power Boilers to ASME Boiler & Pressure Vessel Code, Section I, and CSA Std. B51, Boiler, Pressure Vessel and Pressure Piping Code Pressure Vessels & Boilers
QA 181 Oakville Manufacture of Class 1, 2, 3 & 4 Vessels, Line Valves and Piping Systems; Class 2 & 3 Storage Tanks; and Class 1, 2, & 3 Shop Assembly in Accordance with CSA Std. N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants Pressure Vessels and Components for CANDU Power Plants
QA 02215 Oakville Manufacture of Heating Boilers Except Cast Iron to ASME Boiler & Pressure Vessel Code, Section IV and CSA Std. B51 Boiler, Pressure Vessel and Pressure Piping Code Pressure Vessels & Boilers
QA 02216 Oakville Manufacture of Pressure Vessels to ASME Boiler & Pressure Vessel Code, Section VIII, Division 1 and CSA Std. B51 Boiler, Pressure Vessel and Pressure Piping Code Pressure Vessels & Boilers
QA 03538 Oakville Manufacture of Class 1, 2, 3 & 4 Welded and Non-Welded Category A, B, E & H Type Fittings in Accordance with CSA Std. N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants Pressure Vessels & Boilers
QA 03573 Oakville Manufacture of Power Piping in Accordance with CSA Std. B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.1 Power Piping Pressure Vessels & Boilers
QA 03574 Oakville Manufacture of Process Piping in Accordance with CSA Std. B51, Boiler, Pressure Vessel and Pressure Piping Code and ASME B31.3 Process Piping Pressure Vessels & Boilers
QA 04487 Oakville Class 1, 2 & 3 Fabrication of Appurtenances in Accordance with CSA Std. N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants Pressure Vessels and Components for CANDU Power Plants
QA 05067 Oakville Manufacture of Pressure Vessels to ASME Boiler & Pressure Vessel Code, Section VIII, Division 2 and CSA Std. B51 Boiler, Pressure Vessel and Pressure Piping Code Pressure Vessels & Boilers
QA 05091 Oakville Repair or Modification of Class 1, 2 & 3 Items and Welded and Non-Welded Category A, B, E, & H Type Fittings in Accordance with CSA Std. N285.0, General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants Pressure Vessels and Components for CANDU Power Plants
QA 05198 Oakville Repair and Alterations of Boilers, Pressure Vessels, Piping and A, B, C, D, E, F & H Type Fittings in Accordance with CSA Std. B51, Boiler, Pressure Vessel and Pressure Piping Code Pressure Vessels & Boilers
TS2100D85-2018 Oakville Special Equipment Licensing Office (SELO) Approval for Import of Electric Boilers to The People’s Republic of China Boilers B (Electric Boilers Only)
TS2200D85-2018 Oakville Special Equipment Licensing Office (SELO) Approval for Import of Pressure Vessels to The People’s Republic of China Pressure Vessels D2
0083689 Orillia Quality Management System All Products
QA 04679 Orillia Fabrication of Welded and Non-Welded Category H Type Fittings in Accordance with CSA Std. B51, Boiler, Pressure Vessel and Pressure Piping Code Boilers