CCI Thermal Technologies Inc.

Certifications & Approvals

Manufacturing Certifications

Symbols Certificate No. Location Description Products Covered
N-3578 Oakville Construction of Class 1, 2 & 3 vessels; Class 1, 2 & 3 Piping
Systems; and Class 1, 2 & 3 Shop Assembly
Steam Boilers and Pressure Vessels
NPT Certification N-3579 Oakville Class 1, 2 & 3 Fabrication Without Design Responsibility and
Class 1, 2 & 3 Fabrication With Design Responsibility for Appurtenances and as a Material Organization Supplying Ferrous & Nonferrous Material
Steam Boilers and Pressure Vessels
Ex Certification 003640 Oakville Quality Management System All Products
ISO:9001 2008 013960 Orillia Quality Management System All Products
ISO:9001 2008 800122 Edmonton Quality Management System All Products
ISO:9001 2008 SIRA13ATEXM583 Edmonton Quality Assurance Notification Ruffneck™ and Norseman™ Products
Ex Certification KEMA 05ATEXQ3032 Oakville Quality Assurance Notification Immersion and Circulation Heater Products
H ASME Certification 27,441 Oakville Heating Boilers except Cast Iron Hot Water Boilers and Pressure Vessels
S ASME Certification 27,440 Oakville Manufacture and Assembly of Power Boilers Steam Boilers and Pressure Vessels
U ASME Certification 27,443 Oakville Manufacture of Pressure Vessels Pressure Vessels (Other than Hot Water & Steam)
U ASME Certification 48,340 Oakville Manufacture of Pressure Vessels Pressure Vessels up to 10,000 psi
NB ASME Certification None Oakville Manufacture of Boilers and Pressure Vessels to ASME Code - H, S & U Stamps Pressure Vessels & Boilers
TSSA QA.126 Oakville Manufacture of Boilers & Pressure Vessels to ASME Boiler & Pressure Vessel Code, Sections I, IV and VIII, Division 1, and CSA Std. No. B-51 Boiler, Pressure Vessel and Pressure Piping Code Pressure Vessels & Boilers
TSSA QA.181 Oakville Manufacture of Class 1,2 & 3 Parts and Components in Accordance with CSA Std. No. N285.0 - General Requirements for Pressure Retaining Systems and Components in CANDU Nuclear Power Plants Pressure Vessels and Components for CANDU Power Plants
SELO China Approval TS2100550-2009 Oakville Special Equipment Licensing Office (SELO) Approval for Import of Boilers and Pressure Vessels to The Peoples Republic of China Boilers - Level B (Only for Electric Boilers)
iec certificationIECEx Certification CA/CSA/QAR06.0011/00 Oakville Quality Assessment Report Immersion and Circulation Heater Products
iec certificationIECEx Certification GB/ITS/QAR10.0022/01 Edmonton Quality Assessment Report Electrical Heaters
ABSA AQP - 5129 Edmonton Certificate of Authentication permit Ruffneck™ Products
 

Standard Product Approvals

Symbols File No. Location Description/Product Class Products Covered
EAC Mark RU C-CA.ГБ05.В.00506 Edmonton EAC Certification – Catalytic Gas Heaters for Hazardous Locations WX, MKII
EAC Mark RU C-CA.ГБ05.В.00505 Edmonton EAC Certification - Forced Air Heaters for Hazardous Locations FE2, XGB, HP, FR, EFX
EAC Mark RU C-CA.ГБ05.В.00504 Edmonton EAC Certification – Natural Convection Heaters for Hazardous Locations CF1, XB, XPA
CSA Approved 112313-0-000 Edmonton COMMERCIAL HEATERS (GAS) - Infrared, Unvented and Vented For Use With Natural Gas Unvented Catalytic Type Infrared Heaters Series G and X
For Use With Propane Gas Unvented Catalytic Type Infrared Heaters Series G and X
For Use With Natural Gas Gas-Fired Infra-Red Heaters Series X
For Use With Propane Gas Gas-Fired Infra-Red Heaters Series X
Series X are Certified for use in Class I, Division 1 & 2, Group D (CSA C22.1) Hazardous Locations.
CSA Approved 162836 Edmonton COMMERCIAL HEATERS (GAS) - Infrared, Unvented and Vented Series SF-01 Stratafan™ Thermoelectric Fan
FM Approvals 3009030 Edmonton Cata-Dyne™ Flameless Catalytic Gas Heaters Series X - Models BXaxb, maximum gas input 1,500 to 72,000 Btu/h (0.44 to 21 kW)
Models MXaxb, maximum gas input 1,250 to 60,000 Btu/h (0.37 to 18 kW)
Models WXaxb, maximum gas input 1,250 to 60,000 Btu/h (0.37 to 18kW)
Models MKIIaxb, maximum gas input 4,000 to 16,000 Btu/h (1.17 to 4.686 kW)
Series X models are suitable for use in Class I, Division 1, Group D hazardous (classified) locations
Temperature code T2C at an ambient temperature of 40°C.
a= width in inches 6, 8, 10, 12, 18,or 24
b= length in inches 6, 8, 12, 24, 36, 48, 60, or 72
FM Approvals 3026333 Edmonton Cata-Dyne™ Flameless Catalytic Gas Heaters Series X - Models WXSaxb/WXEaxb, maximum natural gas and propane gas input 1,750 to 14,000 Btu/h (0.51 to 4.1 kW); Series X models are suitable for use in Class I, Division 1, Group D hazardous (classified) locations. Temperature code T2B at an ambient temperature of 40°C.
a= width in inches 6, 8, 10 or 12
b= length in inches 6, 8, 12 or 24
EEx Approvals BKI 05ATEX 037X Edmonton Catalytic Infrared Gas Heater- Unvented and Vented For Use With Natural Gas Unvented Catalytic Type Infrared Heaters Series X
For Use With Propane Gas Unvented Catalytic Type Infrared Heaters Series X
For Use With Natural Gas Gas-Fired Infra-Red Heaters Series X
For Use With Propane Gas Gas-Fired Infra-Red Heaters Series X
Series X are Certified for use in EEx II 2 G EEx IIA T2 230°C, Hazardous Locations.
CSA Approvals 050524-0-000 Edmonton HEATERS - Air - Stationary Type - For Hazardous Locations XD112, XL412, FX412, EXH412, HEX412, KEX412 rated 600V ac max, 60 Hz, 1 or 3 ph, 10.0kW max.
XD116, XL416, FX416, EXH416, HEX416, KEX416 rated 600V ac max, 60 Hz, 1 or 3 ph, 20.0 kW Max.
XD120, XL420, FX420, EXH420, HEX420, KEX420 rated 600V ac max, 60 Hz, 1 or 3 ph, 35.0kW Max.
OAX, XUH rated 600V ac max, 60 Hz, 1 or 3 ph, 35.0kW max
XL412, FX412, EXH412, HEX412, KEX412 rated 415V ac max, 50 Hz, 1 or 3 ph, 8.4kW max.
XL416, FX416, EXH416, HEX416, KEX416 rated 415V ac max, 50 Hz, 1 or 3 ph, 16.7kW max.
XL420, FX420, EXH420, HEX420, KEX420 rated 415V ac max, 50 Hz, 1 or 3 ph, 22.4kW max.
OAX, XUH rated 415V ac max, 50 Hz, 1 or 3 ph, 22.4kW max
Model XL16-240-13.5, rated 240 V max, 60 Hz, 3 phase, 32.4 A max, 13.5 kW max.
Model XL16-208-13.5, rated 208 V max, 60 Hz, 3 phase 37.5 A max, 13.5 kW max.
Model XL16-480-14.0, rated 480 V max, 60 Hz, 3 phase, 16.8 A max, 14.0 kW max.
Series XL16, rated 600 V max, 60 Hz, 1 or 3 phase, 10 or 15 kW.
Series XL12, rated 600 V max, 60 Hz, 1 or 3 phase, 3, 5 or 7.5 kW.
Series XL20, rated 600 V max, 60 Hz, 3 phase, 20 or 25 kW.
Duct heaters, Series DH16, rated 208, 240, 480 or 600 V, 60 Hz, 1 or 3 phase, 10 kW or 15 kW.
CSA US Approvals 73680 Edmonton Temperature - Indicating and Regulating Equipment - Other Than Appliance Type Line voltage room thermostat, Series ET-5, with suffixes, rated 12.5A (non-ind), 125/250/277V ac, (6,000 operations). (Tested in an insulated wall).
CSA US Approvals 72679 Edmonton Temperature - Indicating and Regulating Equipment - For Hazardous Locations Class I, Groups C and D; Class II, Groups E, F and G; Thermostat, Models XTD8-S, -D, rated 22A, 125-277V ac, 3/4 hp at 125V ac, 1-1/2 hp at 250-277V ac, 6000 operations.
CSA Approvals 104054-0-000 Edmonton Temperature - Indicating and Regulating Equipment - For Hazardous Locations Class I, Groups C and D; Class II, Groups E, F and G; Class III
Model XT111, XT112, XT211, XT212, XT311, XT312, OAX-TM, HRC1, HRC2, TEX-1, TEX-2, XUH-T, KXT-211, KXT-212 thermostats, rated 22 A Resistive 480 Vac Max, 1/2 hp 125Vac, 1 hp 250Vac.
UL C US Approvals E132990 Edmonton Temperature - Indicating and Regulating Equipment Room thermostats for fixed electric space heating and/or cooling: Cat. No. ET5-S.
UL C US Approvals E87128 Edmonton Heaters, Air for Use in Hazardous Locations Electric convection air heaters, Series CX1 ProVector, Model CX followed by A or B, followed by 1, 2, 3, 4, 5 or 6, followed by N, followed by 0, with or without H, for use in Hazardous Locations Class I, Div 1,2 Group A, B, C, D temperature code T2A to T4
Fan-type electric heater for ceiling mounting, Model XL3 followed by 12, 16 or 20, followed by 208, 240 or 480, followed by 160 or 360, followed by 3, 5, 7.5, 10, 15, 20 or 25. For supply connections use wire suitable for at least 90 C.
Model FX5, FX4 or XL4 for use in hazardous locations Class I, Div 1,2 Group C,D, Class II Div 1,2 Group E,F,G temperature code T3B
UL Approvals E122504 Edmonton Temperature-Indicating and Regulating Equipment for Use in Hazardous Locations Class I, Divisions 1 and 2, Groups C and D
Class II, Division 1, Groups E, F and G
Class II, Division 2, Groups F and G
Class III
Thermostats, externally adjustable, XT Series, Cat. Nos. XT-111, -112, -211, -212, -311, -312 , XTD8-D, -S, XUH-T.
FM Approvals 3026231 Edmonton Outlet Boxes and Fittings XJB-1 & XJB-2 Series Junction Boxes for Hazardous Locations
EEx Approvals DEMKO 10ATEX0910365X Edmonton Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 94/9/EC FE2 Series of Heaters
II2G Ex d IIB T3
EEx Approvals DEMKO 02ATEX0152068 Edmonton Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 94/9/EC Type CF1 Convection type, wall-mounted electric air heaters.
II2G EEx d IIB T2, T3, or T4 -45°C Ta +40°C
EEx Approvals ITS 05ATEX13473 Edmonton Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 94/9/EC Type XB NORSEMAN CONVECTOR HEATER.
EEx II 2 G, EEx d IIC T3 or T4 -45°C Ta +40°C
CSA US Approvals SIRA 14ATEX1141X Edmonton Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 94/9/EC Type XPA Norseman Convector Heater
II 2G Ex d IIC,IIB, 215°C(T2),T3 or T4 Gb, -30°C Ta +40°C
CSA US Approvals 1631635 Edmonton Outlet Boxes and Fittings - Boxes - For Hazardous Locations - Certified to Canadian & U.S. Standards XJB-1 & XJB-2 Series Junction Boxes for Hazardous Locations
CSA US Approvals LR62892 Edmonton Heaters - Air - Stationary Type - For Hazardous Locations - Certified to Canadian & U.S. Standards XB1, XB2, XB3, XB4 & Convection Heaters for Hazardous Locations
XPA Panel Heaters for Hazardous Locations
XGB Unit Heaters for Hazardous Locations
EAC Mark RU C-CA.ГБ05.В.01243 Oakville EAC Certification – Control Panels for Hazardous Locations CPSD, CPED, CPSP, CPEP Control Panels
EAC Mark RU C-CA.ГБ05.В.01240 Oakville EAC Certification - Immersion Heaters for Hazardous Locations CX Flange and Screwplug Heaters
EAC Mark RU Д-CA.AГ27.В.00336 Oakville EAC Certification BX Convection Heaters
EAC Mark RU Д-CA.AГ27.В.00337 Oakville EAC Certification CX Flange & Screwplug Heaters
DX Tank Immersion Heaters
EX Circulation Heaters
MX Pipe Insert Heaters
EAC Mark RU Д-CA.AГ27.В.00338 Oakville EAC Certification DIF, DFF, DIT & DFT Commercial Duct Heaters
EAC Mark RU Д-CA.AГ27.В.00339 Oakville EAC Certification WX Industrial Duct Heaters
EAC Mark RU Д-CA.AГ27.В.00340 Oakville EAC Certification GE Unit Heaters
EAC Mark RU Д-CA.AГ27.В.00341 Oakville EAC Certification GX Unit Heaters
EAC Mark RU Д-CA.AГ27.В.00342 Oakville EAC Certification PH Control Panel & Enclosure Heaters
EAC Mark RU Д-CA.AГ27.В.00343 Oakville EAC Certification PXFT Control Panel Heaters
EAC Mark RU Д-CA.AГ27.В.00344 Oakville EAC Certification CR1 & CRE1 Washdown Unit Heater
EAC Mark RU Д-CA.AГ27.В.00348 Oakville EAC Certification CPA, CPB, CPE, CPG, CPP, CPS & CPSS Control Panels
CSA Approvals LR5479 Oakville Temperature Indicating and Regulating Equipment - Other Than Appliance Type AR, ARC, AR-MR & ARC-MR Thermostat Assemblies
LWC & LWS Water Level Controls
CSA Approvals LR50852 Oakville Heaters - Air - Stationary Type BX Convection Heater
PCH-NC Unit Heater
OKB-C/L, OKH-C/L, OKD-C/L, OK1, OK3 Radiant Heaters
VWB Hot Water Boilers
VSB Steam Boilers
PX, PXT, PXF & PXFT Control Panel Heater
PXB & PXBT Convection Heater
PH Control Panel & Enclosure Heater
CSA US Approvals LR50852 Oakville Heaters - Air - Stationary Type - Certified to Canadian & U.S. Standards BX Convection Heater
PX, PXT, PXF & PXFT Control Panel Heater
PXB & PXBT Convection Heater
PH Control Panel & Enclosure Heater
CSA Approvals LR50852 Oakville Heaters - Industrial and Laboratory OKA-C/L, OKB-C/L, OKH-C/L, OKD-C/L, OK1, OK3 Radiant Heaters
P Series Melting Pots
GCH Circulation Heaters
CCES Steam Boilers
CSA US Approvals LR50852 Oakville Heaters - Miscellaneous - Certified to Canadian & U.S. Standards CX Flange & Screwplug Heaters
DPH Hot Plate Heater
DX, TLO, TLC, TLS, TLI, KTLO, KTLC, KTLS, KTLI Tank Immersion Heaters
HX & IX Tubular Elements
KX Finned Tubular Elements
EX, GCH, NWH & NWHO Circulation Heaters
MX Pipe Insert Heaters
OX Radiant Elements
WX Industrial Duct Heaters
ARMT, ARMTH, ARMTL, ARMTO, ARMTI, ARMTP, ARMTS, MT, MTH, MTL, MTO, MTI, MTP, MTS Screwplug Heaters
TM, TMO, TMI, TMP & TMSS Flange Heaters
CSA Approvals LR50852 Oakville Heaters - Miscellaneous CWC Series Water Heaters
CX Flange & Screwplug Heaters
DPH Hot Plate Heater
DX, CTS, CTC, CTSS, CTLC, CTLT, BLCK, BLCS, TBL, TBLA, TLO, TLC, TLS, TLI, KTLO, KTLC, KTLS, KTLI & RT Tank Immersion Heaters
HX & IX Tubular Elements
KX Finned Tubular Elements
NWH & NWHO Circulation Heaters
OX Radiant Elements
ARMT, ARMTO, ARMTI, ARMTO, ARMTI, CMT, CMTD, CMTI, MT, MTH, MTL, MTO, MTI, MTS, MTA, RI, RIO & RINO Screwplug Heaters, MTP Pipe Insert Heaters, MX Pipe Insert Heaters, SS & SD Series Strip Heaters
TDH Industrial Duct Heaters
TM, TMO, TMI, TMSS Flange Heaters
TMP Flange Heaters
TX Urn Heater
WX Industrial Duct Heaters
S, PT, SNH, WS, SE, TH, SN, NH, S1, SR & OT Strip Elements
TSE Tubular Strip Heater Elements
SEF, PTE, SSEF, OTF Finstrip Elements
KSEF Koilfin Elements
TC, TS & T1 Tubular Elements
SCB Screwbase Elements
C, CDE & CIR Cartridge Heater Elements
HSP, A, HSW & RA Ring Elements
T Series Tubular Elements
CSA Approvals LR50854 Orillia Heaters - Miscellaneous CX Flange & Screwplug Heaters
DX Tank Immersion Heaters
HX Tubular Elements
IX Tubular Elements
KX Finned Tubular Elements
OX Radiant Elements
MX Pipe Insert Heaters
SX Series Immersion Heaters
T Series Tubular Elements
CSA Approvals LR52982 Oakville Heaters - Air - Stationary Type VWB Hot water Boilers
VSB Steam Boilers
GE &GX Unit Heaters
DIF & DFF Duct Heaters
AX Washdown Unit Heaters
CSA US Approvals LR52982 Oakville Heaters - Air - Stationary Type - Certified to Canadian & U.S. Standards GE & Unit Heaters
DIF & DFF Duct Heaters
AX Washdown Unit Heaters
CSA Approvals LR53699 Oakville Heaters - Miscellaneous SS, SD, SL, ST & 2A Series Strip Heaters
FS, FL & 2A Series Finned Strip Heaters
BC & 2A Series Band Heaters
7A Series Finned Tubular Elements
CSA Approvals LR54439 Oakville Industrial Control Equipment - Miscellaneous Apparatus Industrial Control Panels (4000A Max.)
CSA US Approvals LR54439 Oakville Industrial Control Equipment - Miscellaneous Apparatus - Certified to Canadian & U.S. Standards Industrial Control Panels (200A Max.)
CSA US Approvals 2484986 Oakville Industrial Control Equipment - Miscellaneous Apparatus - Certified to Canadian & U.S. Standards CHS Control Panel
CSA US Approvals LR62892 Oakville Heaters - Air - Stationary Type - For Hazardous Locations - Certified to Canadian & U.S. Standards XB1, XB2, XB3, XB4 & Convection Heaters for Hazardous Locations
XPA Panel Heaters for Hazardous Locations
CX Flange & Screwplug Heaters
MX Pipe Insert Heaters
EX Circulation Heaters
XGB Unit Heaters for Hazardous Locations
XF Convection Heater for Hazardous Locations
XDF Duct Heaters for Hazardous Locations
FPH Flanged Pipe Heaters
CPCX Industrial Control Panels
PGH Pilot Gas Heater
CSA US Approvals LR62892 Oakville Heaters - Miscellaneous - For Hazardous Locations - Certified to Canadian & U.S. Standards CX Flange & Screwplug Heaters
MX Pipe Insert Heaters
EX Circulation Heaters
CSA US Approvals LR62892 Oakville Industrial Control Equipment - Motor Controllers - Auxiliary Devices - For Hazardous Locations - Certified to Canadian & U.S. Standards XS Control Stations for Hazardous Locations, XT Thermostat Assemblies for Hazardous Locations
CSA US Approvals LR62892 Oakville Outlet Boxes and Fittings - Boxes - For Hazardous Locations - Certified to Canadian & U.S. Standards XH Series Terminal Boxes for Hazardous Locations
CSA US Approvals LR92214 Oakville Heaters - Miscellaneous - For Hazardous Locations - Certified to Canadian & U.S. Standards MT, MTO, MTI, MTS, MTH, MTL & MTP Screwplug Heaters
TM, TMO, TMI, TMP & TMSS Flange Heaters
TLC, TLO, TLI, TLS, KTLC, KTLO, KTLI & KTLS Tank Immersion Heaters
NWH, NWHO & GCH Circulation Heaters
CSA Approvals LR92216 Oakville Temperature Indicating and Regulating Equipment - For Hazardous Locations AR-EP1, AR-EP2, ARC-EP1 & ARC-EP2 Thermostat Assemblies for Hazardous Locations
Adhesive Labels 79462 Oakville Adhesive Type Labels Adhesive Labels produced using SATO 8450 Thermal Transfer Printer
Adhesive Labels 02-25092377 Oakville ITRI Certification for Explosive Atmospheres CX Series Screwplug and Flange Immersion Heaters
MX Series Screwplug and Flange Pipe Insert Heaters
EX Series Screwplug and Flange Circulation Heaters
CSA Approvals 206993 Oakville - RANCO Multiple Listing Temperature Indicating and Regulating Equipment - Appliance Type AR & ARR Thermostat Assemblies
UL Approvals E15371 Oakville & Orillia Immersion Heaters 2D,MP & 57C Series Screwplug Heaters
UL C US Approvals E15371 Oakville & Orillia Immersion Heaters - Certified for Canada 2A502G104 & 57C Series Screwplug Heaters
RU Mark Approvals E58727 Orillia Sheathed Heating Elements - Component 38C, 5D, TSA, TWA & 48C Series Tubular Heating Elements
UL Approvals E68162 Oakville Industrial Control Panels Industrial Control Panels
UL C US Approvals E68162 Oakville Industrial Control Panels - Certified for Canada Industrial Control Panels
RU Mark Approvals E73612 Orillia Heaters, Miscellaneous - Component 2D Series, 38C Series, 44C452G Series Immersion Heaters
7A767G Series Finned Tubular Elements
SS, SD, SL, ST & 2A Series Strip Heaters
FS, FL & 2A Series Finned Strip Heaters
BC Series Band Heaters
46C590Y105, 46C595Y Series Tubular Elements
38C208G135 & 38C250G Series Calvane™ Elements
46C113G139 & 46C113U Series Calvane™ Heater Assemblies
CRU Mark Approvals E73612 Orillia Heaters, Miscellaneous - Component - Certified for Canada 38C208G135 & 38C250G Series Calvane™ Elements
46C113G139 & 46C113U Series Calvane™ Heater Assemblies
RU Mark Approvals E96401 Orillia Sheathed Heating Elements - Component CX Flange & Screwplug Heaters
HX & IX Tubular Elements
CT & WW Bake & Broil Elements
RU Mark Approvals E106810 Oakville & Orillia Heaters, Miscellaneous - Component CX Flange & Screwplug Heaters
DX Tank Immersion Heaters
HX Tubular Elements
IX Tubular Elements
KX Finned Tubular Elements
MX Pipe Insert Heaters
OKA & OK3 Radiant Heaters
OX Radiant Elements
WX Industrial Duct Heaters
RU Mark Approvals E150828 Orillia Miscellaneous Heaters for Use in Hazardous Locations - Component 7B Series Finned Tubular Elements for Hazardous Locations
UL Approvals E181806 Oakville & Orillia Air Heaters, Room, Fixed and Location Dedicated OK3, OKB-C/E/F/G/L/T, OKH-C/E/F/G/H/HR/L/T, OKD-C/L/T Radiant Heaters
UL C US Approvals E181806 Oakville & Orillia Air Heaters, Room, Fixed and Location Dedicated - Certified for Canada OK3, OKB-C/E/F/G/L/T, OKH-C/E/F/G/H/HR/L/T, OKD-C/L/T Radiant Heaters
UL Approvals MP2758 Vol.1 Oakville Oil Heaters, Electric 56C Series Screwplug Heaters
RU Mark Approvals MP2758 Vol.1Z Oakville Oil Heaters, Electric - Component 2D,MP & 56C Series Screwplug Heaters
CRU Mark Approvals MP2758 Vol.2 Oakville Oil Heaters, Electric - Certified for Canada 56C Series Screwplug Heaters
UL C US Approvals MP2758 Vol.3 Oakville Oil Heaters, Electric - Certified for Canada 56C Series Screwplug Heaters
RU Mark Approvals SA3843 Orillia Heaters, Crankcase, Defrost and Refrigeration - Component 5D, 7A, 7D, 39C, 44C & 46C Series Cartridge Heaters & Tubular Elements, Defroster Type Elements
EEx Approvals KEMA 05ATEX2002 Oakville Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 94/9/EC CX Series Screwplug and Flange Immersion Heaters
MX Series Screwplug and Flange Pipe Insert Heaters
EX Series Screwplug and Flange Circulation Heaters
EEx Approvals KEMA
06ATEX0066X
Oakville Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 94/9/EC Control Panel Series CPSD, CPED, CPSP & CPEP (Flameproof)
EEx Approvals DEKRA
11ATEX0263
Oakville Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 94/9/EC Control Panel Series CPSD, CPED, CPSP & CPEP (TYPE px-Purged)
EEx Approvals DEKRA
11ATEX0264
Oakville Equipment or Protective System Intended for use in Potentially Explosive Atmospheres Directive 94/9/EC Control Panel Series CPSD, CPED, CPSP & CPEP (TYPE pz-Purged)
CE Approvals None Oakville Manufacturer's Declaration of Conformity to Meet Low Voltage and EMC Directives as applicable CX Series Screwplug and Flange Immersion Heaters
MX Series Screwplug and Flange Pipe Insert Heaters
EX Series Screwplug and Flange Circulation Heaters
OKA, OKB, OKH, OKD & OK3 Series Radiant Heaters
DIF & DFF Series Duct Heaters
CP Series Control Panels
IX, KX & HX Series Tubular Heating Elements
GE & GX Unit Heaters
CRE1 Washdown Unit Heater
CE Approvals None Orillia Manufacturer's Declaration of Conformity to Meet Low Voltage and EMC Directives as applicable IX, KX & HX Series Tubular Heating Elements
FV Series Calvane™ Heaters
SS, SD, SL, ST & 2A Series Strip Heaters
FS, FL & 2A Series Finned Strip Heaters
BC Series Band Heaters
CSA US Approvals LR11536 Orillia Heaters - Industrial and Laboratory - Certified to US Standards Infrared Paint Dryers - DriQuik™ Models BR-60-1800-QT; BR30-1000-QT; BR-15-400-QT 240V or 480V
CSA Approvals LR11536 Orillia Heaters - Industrial and Laboratory Infrared Paint Dryers - DriQuik™ Models BR-60-1800-QT, BR30-1000-QT, BR-15-400-QT, 240V or 480V
Models 16, 12000W & 17 14000W, 220V
Models 4-1000, 4-750, 4-650, 4-500, 580V, 480V, 240V or 120V
Models 2-1000, 2-750, 2-600, 2-500; 240V, 208V or 120V; Models 1-1000, 1-750, 1-650, 1-500; 120V or 145V
IECEx Approvals IECEx CSA 07.004 Oakville IEC Certification Scheme for Explosive Atmospheres CX Series Screwplug and Flange Immersion Heaters
MX Series Screwplug and Flange Pipe Insert Heaters
EX Series Screwplug and Flange Circulation Heaters
IECEx Approvals IECEx CSA 08.001 Oakville IEC Certification Scheme for Explosive Atmospheres Control Panel Series CPSD, CPED, CPSP & CPEP (Flameproof and Pressurized Enclosures)
UL C US Approvals E218554 Oakville Air Heaters, Room, Fixed and Location Dedicated Commercial/industrial air heater, Model CR1 or CCR1, followed by 208, 240, 480 or 600, followed by 1 or 3, followed by 60, followed by -3, -5, -7.5, -10, -20, -25, -30, -35 or -39, may be followed by up to 10 characters.
CRU Mark Approvals E68162 Oakville Industrial Control Panel PXF & PXFT Control Panel Heaters
PH Control Panel & Enclosure Heaters