The RMO monitor elements are tested and qualified in accordance with the API/EI 1583, 4th edition (Qualification Procedures for Aviation Fuel Filter Monitors with Absorbent Type Elements). The monitor elements have less than 15 ppm of free water in the effluent and work even in the presence of surfactants and additives in the fuel. The RMO series monitor elements are fully interchangeable with other API/EI approved elements. They also feature less than 0.26 mg/l average of solids in the effluent. Filter monitor vessels fitted with monitor elements are used on aircraft refueling vehicles, hydrant dispensers and other mobile fueling equipment.
Features & Benefits at a Glance
- tested and qualified to API/EI 1583, 4th Edition
- nominal filtration of 1 micron
- changeout differential pressure of 25 psid
- minimum collapse pressure of 175 psid
- recommended service time: 12 months
- recommended storage time: 24 months
- maximum operating temperature of 176ºF (80ºC)
- out to in flow direction
- seals or O-ring in NBR (Buna-N)
- outside diameter of 2" or 6"
- not suitable for use with military fuels containing FSII anti-icing agents
